MOUNTING-PLATE 4776577 - Caterpillar

Illustration 1 g00693597
(1) Torque for two screws ... 9 3 N m (80 27 lb in) (2) Apply 4C-4030 Thread Lock Compound to threads before assembling the knob. (3) Torque for mounting nut on switch ... 2.2 0.1 N m (19.47 0.89 lb in) (4) Torque for four screws ... 9 3 N m (80 27 lb in) (5) Fill the cavities with 1P-0808 Multipurpose Grease prior to installation. (6) Peen both ends of pin at assembly. (7) Torque for connector mounting nut ... 41 7 N m (30 5 lb ft)Assembly Procedure
Assemble housing (8) and shaft (9) so that the timing marks are aligned. Center shift lever (10) on the fourth gear position. Tighten three bolts (11) .
When you install the switch (12), align position switch (12) with the position of shift lever (10). Tighten two bolts (13) after checking the actuation of the reverse position and the eighth speed position.
Move shift lever (10) to the end of the slot at the reverse position. Adjust tang (14) in order to provide actuation of backup switch (15) .