MOUNTING GROUP 4J1924 - Caterpillar

Seat Belt Adjustment for Non-Retractable Seat Belts
Adjust both ends of the seat belt. The seat belt should be snug but comfortable.Lengthening the Seat Belt
Illustration 1 g00100709
Unfasten the seat belt.
Illustration 2 g00932817
To remove the slack in outer loop (1), rotate buckle (2). This will free the lock bar. This permits the seat belt to move through the buckle.
Remove the slack from the outer belt loop by pulling on the buckle.
Loosen the other half of the seat belt in the same manner. If the seat belt does not fit snugly with the buckle in the center, readjust the seat belt. Shortening the Seat Belt
Illustration 3 g00100713
Fasten the seat belt. Pull out on the outer belt loop in order to tighten the seat belt.
Adjust the other half of the seat belt in the same manner.
If the seat belt does not fit snugly with the buckle in the center, readjust the seat belt. Fastening The Seat Belt
Illustration 4 g00932818Fasten the seat belt catch (3) into the buckle (2). Make sure that the seat belt is placed low across the lap of the operator.Releasing The Seat Belt
Illustration 5 g00100717Pull up on the release lever. Releasing the lever will release the seat belt.