MOUNTING GP-CONTROL 7Y5471 - Caterpillar

Illustration 1 g03819137
Table 1
Specification for 343-4443 Cylinder Liner    
Item    Qty    Part    Specification Description    
A     -     -     Thickness of the flange on cylinder liner is
33.00 0.03 mm (1.299 0.001 inch).    
B     -     -     Bore of the new cylinder liner is
300.025 0.025 mm (11.8120 0.0010 inch).    
-     -     -     Use the following procedure to install the cylinder liner:
1. Apply liquid soap on the cylinder block liner bore surfaces and the rubber seals that are on the lower end of the cylinder liner.
2. Dip the filler band completely in clean engine oil for a moment.
3. Immediately install the filler band in the groove that is under the flange.
4. Immediately install the cylinder liner into the cylinder block before the expansion of the filler band.