MTG GP-WHEEL 0976099 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1835 Adapter 1
4C-9633 Puller Stud 1
6V-3160 Double Acting Cylinder 1
9U-6833 Nut 1
7F-6068 Sleeve 1
350-7768 Electric Hydraulic Pump Gp 115V 1
350 - 7769 Electric Hydraulic Pump Gp 230V 1
Illustration 1 g01809014
Attach a suitable lifting device to brace (1). The weight of brace (1) is approximately 68 kg (150 lb). Remove pin (3). Remove bolts and plate (2). Remove pin (4). Remove brace (1).
Illustration 2 g01814557
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Remove the retaining rings. Install Tooling (A) in order to remove bearing (5)(not shown). Installation Procedure
Install brace (1) in the reverse order of removal.
Lower the temperature of bearing (5) before installation.