MTG GP-CAB 4747337 - Caterpillar

Start By:a. remove sliding floor or ejector rear guide rollers 1. Use tooling (A) to remove seal (3).2. Remove spacer (1).3. Use tooling (B) to remove retaining ring (5). 4. Install nut (7) and use tooling (C) to remove shaft (2) and bearing (4).5. Remove bearing (4) from the shaft. The following steps are for assembly of the sliding floor or ejector rear guide rollers.6. Install bearing (4) on shaft (2).7. Use tooling (D) and a press to install bearing (4) and shaft (2) in roller (6).8. Use tooling (B) to install retaining ring (5).9. Use tooling (D) to install seal (3). Install the lip of the seal away from the bearing.10. Install spacer (1).End By:a. install sliding floor or ejector rear guide rollers