MTG GP- 5054224 - Caterpillar

Illustration 5 g00790823
Remove two bolts (9) and two clips (10) from the lines under the lift arm assembly.
Repeat step 5 for the opposite side of the lift arm assembly.
Illustration 6 g00790828
Remove two bolts (11), two clips (12), and the line assemblies from the underside of the lift arm assembly.
Illustration 7 g00593621
Use a suitable lifting device to support the lift arms.
Illustration 8 g00790831
Remove bolt (13) and pin assembly (14) from both sides of the lift arm assembly.
Remove the lift arm assembly from the machine. The weight of the lift arm assembly is 322 kg (710 lb).Removal Procedure for the 252 and the 262
Attach a suitable lifting device to the lift arm assembly. The weight of the lift arm assembly is 442 kg (975 lb).
Illustration 9 g00790859
Remove snap ring (1). Remove pin (2) .
Repeat step 2 for the opposite side.
Tilt the cab. Refer to Disassembly and Assembly, "Cab - Tilt".
Illustration 10 g00790867
Disconnect line (3) and line (4) .
Repeat step 5 for the opposite side.
Illustration 11 g00790907
Remove bolts (5) and washers. Remove hose clamps (6) .
Repeat step 7 for the opposite side.
Illustration 12 g00790919
Remove snap ring (7). Remove pin (8) .
Repeat step 9 for the opposite side.Note: Support link arm assembly when the second pin is removed. Lay the link assembly against the frame. Take notice of the location of shims that are removed for installation purposes.
Raise the lift arm assembly in order to gain access to the inside of the lower link assembly.
Illustration 13 g00790932
Remove hex head bolt (9) and the washer.
Illustration 14 g00790958
Remove bolt (11) and the washer. Remove pin (12) .
Repeat steps 12 and 13 for the opposite side.Note: Take notice of the location of the shims that are removed for installation purposes. Use caution when you are removing pin (12). The inside link arm will drop when the pin is removed. The inside link arm weighs 23 kg (50 lb).
Remove the lift arm assembly. The lift arm assembly weighs 442 kg (975 lb).
Illustration 15 g00790990
Remove bolts (13) and washers. Remove hose clamps (14) .
Repeat step 16 for the opposite side.
Attach a suitable lifting device to the rear link assembly.
Illustration 16 g00791015
Remove bolt (15) and the washer. Remove pin (16) .
Repeat step 19 for the opposite side.
Remove the rear link assembly. The rear link assembly weighs 75 kg (165 lb).