MUDGUARD AS-LH 2170338 - Caterpillar

Illustration 1 g01317241
Press the "OK" key. As a default, the "Distance Units" dialog is selected. The dialog in Illustration 1 appears.
Do the following as necessary from any of the "Units" dialogs.
Press the "Distance" soft key in order to select the distance units.
Press the "Speed" soft key in order to select the speed units.
Press the "Grade" soft key in order to select the grade units.
Press the "Cross Slope" soft key in order to select the cross slope units.
Press the "Station Format" soft key in order to select the station (chainage) format for a road design.
Press the "ESC" key in order to cancel the changes and return to the "Setup Menu – Installation" dialog.
When the units have been set, press the "OK" key in order to save the settings and return to the "Setup Menu – Installation" dialog. After the changes have been made you can enter measurements in those units.
Press the "ESC" key in order to exit the "Setup Menu – Installation" dialog.The unit settings are saved in the display settings file.Distance
Distance values appear on the screen in the following formats.
Meters - as "m" (default for all display firmware files except for US English)
International feet - as "ft"
US survey feet – as "FT" (default for US English display firmware)Perform the following steps in order