AVSPARE.COM
parts catalog

MUFFLER A 0876269 - Caterpillar



0876269 MUFFLER A Caterpillar parts MUFFLER
Rating:
21
Alternative (cross code) number:
CA0876269
087-6269
0876269
Caterpillar 0876269 MUFFLER A

Buy MUFFLER A 0876269 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g03688862
Typical example
Table 1
Specification for 396-6411 Track Roller Frame Gp and 396-6413 Track Roller Frame Gp    
Item     Qty     Part     Specification Description    
Apply 5P-0960 Grease Cartridge until the lubricant is visible on both sides of the bearing.    
1     As required, use the following shims until the centerline of front and rear roller assembly are within
0.0 to 4.0 mm (0.00 to 0.16 inch) of the drive wheel centerline:    
2 190-2479 Shim     Thickness is
1.5 mm (0.06 inch).    
2 190-2478 Shim     Thickness is
3.0 mm (0.12 inch).    
2 190-2477 Shim     Thickness is
6.35 mm (0.250 inch).    
2     1     269-6346 Shaft     The end of the surface must be parallel within
0.0 to 0.6 mm (0.00 to 0.03 inch) to the final drive mounting face.    
3     As required, use the following shims until the centerline of front and rear roller assembly are within
0.0 to 4.0 mm (0.00 to 0.16 inch) of the drive wheel centerline:    
2 190-2476 Shim     Thickness is
1.5 mm (0.06 inch).    
2 190-2475 Shim     Thickness is
3.0 mm (0.12 inch).    
2 190-2474 Shim     Thickness is
6.35 mm (0.250 inch).    
4     1     415-1776 Shaft     The end of the surface must be parallel with the final drive within
0.0 to 0.5 mm (0.00 to 0.02 inch).    
5     1     7Y-5265 Bolt     Torque to
1350 50 N m (996 37 lb ft).    
6     22     8T-5878 Bolt     Torque to
900 100 N m (664 74 lb ft).    
7     1     415-1784 Shim     Mate the chamfered face of the shim against 415-1776 Shaft shoulder.
Thickness is
5.0 mm (0.20 inch).    
8     1     190-2490 Plate     Install the plate to the face of the shaft. Add required shim (3) between the plate and the frame until the gap is not more than
0.5 mm (0.02 inch).    
9     As required, use the following shims until the centerline of front and rear roller assembly are within
0.0 to 4.0 mm (0.00 to 0.16 inch) of the drive wheel centerline:    
1 415-1783 Shim     Thickness is
0.45 mm (0.018 inch).    
1 415-1782 Shim     Thickness is
1.5 mm (0.06 inch).    
2 415-1781 Shim     Thickness is
3.0 mm (0.12 inch).    
1 415-1780 Shim     Thickness is
6.35 mm (0.250 inch).    
10     1     160-6513 Bolt     Torque to
1350 50 N m (996 37 lb ft).    
11     As required, use the following shims until the centerline of front and rear roller assembly are within
0.0 to 4.0 mm (0.00 to 0.16 inch) of the drive wheel centerline:    
1 415-1783 Shim     Thickness is
0.45 mm (0.018 inch).    
1 415-1782 Shim     Thickness is
1.5 mm (0.06 inch).    
1 415-1780 Shim     Thickness is
6.35 mm (0.250 inch).


Parts muffler Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.