MUFFLER 1122819 - Caterpillar

Illustration 2 g00718909
Put the armature assembly (19) in position in the starting motor housing. Use the cotter pins (22) to hold the brushes against the brush springs until the commutator is under the brushes.
Illustration 3 g00719542
Install the bushing (17) into the end cover with the driver group.
Illustration 4 g00718901
Put the end cover assembly (14) in position on the starting motor housing.
Install the shims (16). Install the C washer (15) .
Put Molybdenum Grease on the ends of the armature. Put Molybdenum Grease in the center cover. Install the seal and install the center cover. Put Thread Lock Compound on the threads of the two screws. Install the screws. Tighten the screws