MUFFLER AS 1636559 - Caterpillar

1636559 MUFFLER AS Caterpillar parts 769D, 771D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1636559
163-6559
1636559

Weight: 63 pounds 28 kg.

Information:

BODY DIAMETER/WIDTH 308 mm

BODY LENGTH 625.3 mm

INLET ID 171 mm

OUTLET OD 167 mm

OVAL HEIGHT 435 mm

OVERALL LENGTH 844.2 mm

PROTECTIVE SHIELD N

WITH EJECTOR N

WITH MOUNTING BRACKET N

WITH OUTER WRAP N

Buy MUFFLER AS 1636559 Caterpillar genuine, new aftermarket tractor parts with delivery
QUARRY TRUCK, TRUCK,

Compatible equipment models: 1636559:

QUARRY TRUCK 771D

TRUCK 769D Caterpillar

Number on catalog scheme: 8

Caterpillar 1636559 Parts scheme MUFFLER AS

For full view, you need register

Information:

Table 2
Changes To The Air Inlet Heater Arrangement For 320B Excavators
Qty New Part Number Description Former Part Number
1 197-4330 Air Controller 104-3204
1 168-5057 Air Inlet Heater 5I-7746
1 197-4436 Starting Aid Harness As -
Changes To The Air Inlet Heater Arrangement For 322B, 325B, and M325B Excavators
1 197-4330 Air Controller 104-3204
Illustration 1 g00791997
Typical View of the Control Panel Without the Panel Door (A) 197-4330 Air Controller (B) Safety Device for the Starting Aid Relay (C) 12-pin Connector (D) 306-Green Wire (E) 3S-2093 Cable Strap (F) Wiring Harness Assembly (G) Electrical Connector for the AIH Electrical Control
Illustration 2 g00792610
View A-A from Illustration 1 (B) Safety Device for the Starting Aid RelayProcedure For the Installation of the New 197-4330 Air Controller in 320B, 320B L, and 320B N Excavators
Table 3
Required Parts
Model Qty Part Number Description
320B,
320B L,
320B N 1
1
1
6 197-4330
168-5057
197-4436
3S-2093 Air Controller
Air Inlet Heater
Starting Aid Harness As
Cable Strap
Procure the parts that are listed in Table 3. The locations of the components are shown in Illustration 1 and Illustration 4.
Disassemble connector (G) from the 104-3204 Air Controller .
Remove the former 104-3204 Air Controller from the control panel.
Install the new 197-4330 Air Controller in place of the former electronic controller.
Illustration 3 g00793392
Wiring Schematic For The AIH
Assemble connector (G) to the new 197-4436 Starting Aid Harness As. Refer to the wiring schematic that is shown in Illustration 3.
Install the wire harness with connector (G) to the new controller.
Disassemble connector (B) from the former wire harness.
Assemble connector (B) to the new 197-4436 Starting Aid Harness As .
Install the wire harness with connector (B) to the safety device for the air heater relay.
Install the wire harness at the 12-pin connector (C) .
Install the 306-Green Wire into pin location 5 of the 12-pin connector (C) .
Secure the new wire harness with the new cable straps (E) .
Illustration 4 g00797601
Location of the Air Inlet Heater (J) 168-5057 Air Inlet Heater
Remove the former 5I-7746 Heater As from the air intake manifold. The location of the air inlet heater is shown in Illustration 4. Install the new 168-5057 Air Inlet Heater .Procedure For the Installation of the New 197-4330 Air Controller in 322B, 322B L, 325B, 325B L, and M325BExcavators
Procure a 197-4330 Air Controller. The location of the electronic controller is shown in Illustration 1.
Disassemble wire harness connector (G) from the 104-3204 Air Controller .
Remove the electronic controller from the control panel.
Install the new 197-4330 Air Controller in place of the former electronic controller.
Assemble the wire harness connector to the new electronic controller.