MUFFLER GP 1852124 - Caterpillar

Illustration 21 g01112593
Remove stator (44) .
Illustration 22 g01112597
Use Tooling (B) in order to remove retaining ring (45) . Remove race (46) from stator (44) .
Illustration 23 g01112618
Remove inner race (49) , rollers (48) , and springs (47) from stator (44) .
Illustration 24 g01112623
Use Tooling (B) in order to remove retaining ring (50) . Remove race (51) from stator (44) .
Illustration 25 g01112624
Raise the temperature of stator (44) . Push cam (52) from stator (44) if it is necessary.
Illustration 26 g01117164
Illustration 27 g02009702
Remove bearing (53) in order to remove race (54) and retainer (55) .
Illustration 28 g01117157
Use Tooling (C) in order to remove retaining ring (57) . Remove turbine (56) .
Illustration 29 g01112633
Remove bolts (58) and the washers . Remove hub (57A) from turbine (56) .
Illustration 30 g01112634
Illustration 31 g01112637
Use a suitable press in order to remove flange (61) with ring gear (59) from the torque divider.
Use a hammer and a punch to push pins (60) into flange (61) . Compress retaining ring (62) and remove ring gear (59) from flange (61) . Remove pins (60) and retaining ring (62) from flange (61) .
Illustration 32 g01112639
Illustration 33 g01112641
Remove seal ring (64) from seal carrier (63) .
Install three of Tooling (G) in order to remove seal carrier (63) from flange (61) .
Illustration 34 g01112642
Inspect bearings (65) . If bearings (65) are worn or damaged, use Tooling (D) in order to remove bearings (65) from flange (61) .
Illustration 35 g01112645
Use Tooling (B) in order to remove retaining ring (66) . Use a suitable press in order to remove bearing (68) and sleeve (67) .