2010346 MUFFLER AS Caterpillar parts
120H, 12H, 135H
Rating:
Alternative (cross code) number:
CA2010346
201-0346
2010346
CA2010346
201-0346
2010346
Weight: 29 pounds 13 kg.
Information:
BODY DIAMETER/WIDTH
281.7
mm
BODY LENGTH
477
mm
INLET ID
85.6
mm
OUTLET OD
127
mm
OVAL HEIGHT
0
mm
OVERALL LENGTH
477
mm
PROTECTIVE SHIELD
N
WITH EJECTOR
N
WITH MOUNTING BRACKET
Y
WITH OUTER WRAP
N
MOTOR GRADER,
You can buy:
US$387.85
29 May 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
2010346 Muffler Assembly fits Caterpillar - Model 120H 12H 135H - Compatible Equipment Motor Grader - 201-0346, CA2010346 OEM
Sourcefy Made with the Highest Quality Components Available || 6 Months Unlimited Warranty || Pressure and Computer tested for consistent Quality and unsurpassed reliability || Fits Caterpillar 120H 12H 135H Motor Grader
Sourcefy Made with the Highest Quality Components Available || 6 Months Unlimited Warranty || Pressure and Computer tested for consistent Quality and unsurpassed reliability || Fits Caterpillar 120H 12H 135H Motor Grader
Number on catalog scheme:
7
For full view, you need register
Information:
Illustration 1 g02553357
Right side view
Illustration 2 g02553358
Bolt tightening sequence
Table 1
Specification for 271-0559 Air Lines Gp
Item Qty Part Specification Description
1 16 216-2211 Clamp Use the following procedure to tighten the clamp:
1. Center the clamps within marking on the hose.
2. Orient the clamps so that the T-bolts are separated by 90 degrees.
3. Torque to 10 2 N m (89 18 lb in).
2 8 6V-3917 O-Ring Seal Before assembly, lightly lubricate the bore with glycerin or an approved equivalent.
3 10 8J-5985 Bolt Use the following procedure in order to assemble the aftercooler assembly and tighten the bolts:
1. Assemble the seals to the aftercooler core.
2. Temporarily secure the bottom seal to the aftercooler with tape. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal.
3. Assemble the aftercooler with seals to the inlet manifold.
4. Inspect the bottom seal in order to ensure that the seal is seating correctly in the recess.
5. Install the aftercooler cover.
6. Inspect the upper seal in order to ensure that the seal is seating correctly in the recess.
7. Install the cover bolts. Hand tighten the cover bolts.
8. Tighten the bolts in a numerical sequence that is shown in Illustration 2 to 24 N m (18 lb ft).
9. Again, tighten the bolts in a numerical sequence that is shown in Illustration2 to 47 N m (35 lb ft).
10. Remove the tape.
4 12 6V-5101 O-Ring Seal Before assembly, lightly lubricate the bore with glycerin or an approved equivalent.
Caterpillar parts catalog:
Parts muffler Caterpillar catalog:
120H, 135H
140H, 143H, 14H, 160H, 163H, 16H
140H, 160H
16H NA
12H, 12H NA
3521486
MUFFLER AS
12M, 140M
12M, 140M
140M
120M, 12M
2986551
MUFFLER AS
140M, 160M
140M, 160M
140H