MUFFLER GP-SPARK ARRESTOR 2145583 - Caterpillar

Window Wiper and Washer Group
Illustration 1 g00751519
View from the Left Side of the Cab
Illustration 2 g01049471
(1) Tighten the nut to the following torque. ... 14 2 N m (125 18 lb in)The tension of the arm in the loaded position ... 7.5 0.5 N (1.7 0.1 lb)Note: Attach the splined wiper arm to the splined shaft. Attach the wiper arm without the splines to the idler shaft. (2) Tighten the nut to the following torque. ... 14 2 N m (125 18 lb in)The tension of the wiper arm in the loaded position ... 7.7 0.5 N m (68 4 lb in)Wiper Motor
Illustration 3 g01049472
6-Pin Connector (1) Open. (2) Ground. (3) Park Position. (4) Low Speed. (5) High Speed. (6) Battery Voltage. (7) Tighten the nut to the following torque. ... 19 1 N m (170 9 lb in) (8) Tighten the mounting hardware to the following torque. ... 6 1 N m (53 9 lb in) (M) Wiper MotorThe Location of the Wiper Arms
Illustration 4 g00751613
View from the Front of the CabNote: Callout (C) represents the edge of the window. (D) The minimum distance from the edge of the window (C) to the front wiper should be 60 mm (2.4 inch) in the park position. (E) The maximum distance from the edge of the window (C) to the front wiper should be 110 mm (4.3 inch) in the park position. (F) The rear window wiper is parked on the rear window within 5° from the vertical position.