2299601 MUFFLER AS Caterpillar parts
D6R III, D6T, D7R XR
Rating:
Alternative (cross code) number:
CA2299601
229-9601
2299601
CA2299601
229-9601
2299601
Weight: 49 pounds 22 kg.
Information:
BODY LENGTH
355
mm
INLET ID
102.1
mm
OUTLET OD
101.4
mm
PROTECTIVE SHIELD
N
WITH EJECTOR
N
WITH MOUNTING BRACKET
Y
WITH OUTER WRAP
Y
BODY DIAMETER/WIDTH
247.5
OVERALL LENGTH
571.5
OVERALL HEIGHT
364
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
RAParts 2299601 Muffler As Fits Caterpillar Models
Reliable Aftermarket Parts OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
Reliable Aftermarket Parts OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
CTP 2299601 Muffler Assembly for Models D6R/D6T/D7R
CTP For models D6R/D6T/D7R || Sold in each || Easy in-and-out fit
CTP For models D6R/D6T/D7R || Sold in each || Easy in-and-out fit
RAParts 2299601 Muffler As Fits Caterpillar Models
Reliable Aftermarket Parts OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
Reliable Aftermarket Parts OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
Number on catalog scheme:
2
For full view, you need register
Information:
Table 1 lists the diagnostic codes for the Diesel Exhaust Fluid (DEF) pump reverting valve circuit.
Table 1
Diagnostic Trouble Codes
J1939 Code CDL Code Code Description Comments
4376-5 3862-5 Aftertreatment 1 Diesel Exhaust Fluid Return Valve : Current Below Normal This code indicates there is problem with the DEF pump reverting valve or the Pump Electronic Tank Unit (PETU) wiring harness.
4376-6 3862-6 Aftertreatment 1 Diesel Exhaust Fluid Return Valve : Current Above Normal This code indicates there is problem with the DEF pump reverting valve or the PETU wiring harness.
Follow the troubleshooting procedure in order to identify the root cause of the problem. Note: 372-5260 Test Kit is required for completing this procedure.
Illustration 1 g03171637
Complete the procedure in the order in which the steps are listed.
Table 2
Troubleshooting Test Steps Values Results
1. Check for Opens in the PETU Wiring Harness for the Reverting Valve
A. Turn the keyswitch to the OFF position for 2 minutes. The keyswitch must be OFF for 2 minutes to allow the DEF pump to purge, reset the code, and reset the Diesel Exhaust Fluid Controller (DCU).
B. Disconnect the PETU wiring harness from the DEF pump and from the DCU.
C. Connect the 398-5063 Break-out Connector to the DCU connector. Connect the 398-5056 Break-out Connector to the DEF pump connector.
The connectors must be used to prevent damage to the DCU and DEF pump connector.
D. Measure the resistance between terminal 11 (reverting valve +) on the DEF pump connector and terminal 86 (reverting valve +) on the 86 pin DCU connector.
E. Measure the resistance between terminal 12 (reverting valve -) on the DEF pump connector and terminal 65 (reverting valve -) on the 86 pin DCU connector.
10 Ohms
Result: There were less than 10 Ohms of resistance on both of the reverting valve wires.
Proceed to Test Step 2.
Result: There were more than 10 Ohms of resistance on either wire for the reverting valve.
Repair: There is an open in the harness. Repair the wiring or replace the harness.
Verify that the problem is resolved. Proceed to Test Step 4.
2. Check for Short Circuits in the PETU Wiring Harness for the Reverting Valve
A. Turn the keyswitch to the OFF position.
B. Disconnect the PETU wiring harness from the DEF pump.
C. Disconnect the 86 pin connector from the DCU.
D. Connect the 398-5056 Break-out Connector to the DEF pump connector.
The connector must be used to prevent damage to the DEF pump connector.
E. Measure the resistance between terminal 11 (reverting valve +) on the DEF pump connector and a known good chassis ground.
F. Measure the resistance between terminal 12 (reverting valve -) on the DEF pump connector and a known good chassis ground.
100k Ohms
Result: There was more than 100 K Ohms of resistance between
Table 1
Diagnostic Trouble Codes
J1939 Code CDL Code Code Description Comments
4376-5 3862-5 Aftertreatment 1 Diesel Exhaust Fluid Return Valve : Current Below Normal This code indicates there is problem with the DEF pump reverting valve or the Pump Electronic Tank Unit (PETU) wiring harness.
4376-6 3862-6 Aftertreatment 1 Diesel Exhaust Fluid Return Valve : Current Above Normal This code indicates there is problem with the DEF pump reverting valve or the PETU wiring harness.
Follow the troubleshooting procedure in order to identify the root cause of the problem. Note: 372-5260 Test Kit is required for completing this procedure.
Illustration 1 g03171637
Complete the procedure in the order in which the steps are listed.
Table 2
Troubleshooting Test Steps Values Results
1. Check for Opens in the PETU Wiring Harness for the Reverting Valve
A. Turn the keyswitch to the OFF position for 2 minutes. The keyswitch must be OFF for 2 minutes to allow the DEF pump to purge, reset the code, and reset the Diesel Exhaust Fluid Controller (DCU).
B. Disconnect the PETU wiring harness from the DEF pump and from the DCU.
C. Connect the 398-5063 Break-out Connector to the DCU connector. Connect the 398-5056 Break-out Connector to the DEF pump connector.
The connectors must be used to prevent damage to the DCU and DEF pump connector.
D. Measure the resistance between terminal 11 (reverting valve +) on the DEF pump connector and terminal 86 (reverting valve +) on the 86 pin DCU connector.
E. Measure the resistance between terminal 12 (reverting valve -) on the DEF pump connector and terminal 65 (reverting valve -) on the 86 pin DCU connector.
10 Ohms
Result: There were less than 10 Ohms of resistance on both of the reverting valve wires.
Proceed to Test Step 2.
Result: There were more than 10 Ohms of resistance on either wire for the reverting valve.
Repair: There is an open in the harness. Repair the wiring or replace the harness.
Verify that the problem is resolved. Proceed to Test Step 4.
2. Check for Short Circuits in the PETU Wiring Harness for the Reverting Valve
A. Turn the keyswitch to the OFF position.
B. Disconnect the PETU wiring harness from the DEF pump.
C. Disconnect the 86 pin connector from the DCU.
D. Connect the 398-5056 Break-out Connector to the DEF pump connector.
The connector must be used to prevent damage to the DEF pump connector.
E. Measure the resistance between terminal 11 (reverting valve +) on the DEF pump connector and a known good chassis ground.
F. Measure the resistance between terminal 12 (reverting valve -) on the DEF pump connector and a known good chassis ground.
100k Ohms
Result: There was more than 100 K Ohms of resistance between
Caterpillar parts catalog:
Parts muffler Caterpillar catalog:
2393686
MUFFLER GP
D6R III, D6T, D7R XR
D6R III, D6T, D7R XR
2775840
MUFFLER & CONVERTER AS
D6R III
D6R III
D5R LGP, D6K, D6K LGP, D6K XL, D6N, PL61
583T, 587T, D8R, D8T, PL83, PL87
2573189
MUFFLER AS
973C
973C
D3G, D4G, D5G
2247519
MUFFLER AS
D3G, D4G, D5G
D3G, D4G, D5G
2169040
MUFFLER AS
D3G, D4G, D5G
D3G, D4G, D5G
8M1530
MUFFLER
824, 955H, 955K, D4D
824, 955H, 955K, D4D
4190042
MUFFLER AS
D6K2
D6K2
2778722
MUFFLER AS
973D
973D
2915505
MUFFLER AS
D3K XL, D4K XL, D5K LGP
D3K XL, D4K XL, D5K LGP
2905642
MUFFLER AS
953D, 963D
953D, 963D
2775840
MUFFLER & CONVERTER AS
D6R III
D6R III