2389987 MUFFLER Caterpillar parts AD45, AD45B, AD55, AE40 II MUFFLER
Alternative (cross code) number:
Weight: 44 pounds 20 kg.
Buy MUFFLER 2389987 Caterpillar genuine, new aftermarket tractor parts with delivery
UNDERGROUND ART TRUCK,
Illustration 1 g03084917
Disconnect the five connectors (1) and push the connectors into the cab.
Illustration 2 g03085341
(2) 234-6609 Cover (3) 234-6608 Cover (4) Screws
Remove screws (4) and remove covers (2) and (3) .Note: Be careful not to break the tabs on the inside of the covers.
Illustration 3 g03085449
(5) 234-6610 Cover
Remove cover (5) .
Illustration 4 g03085598
(6) 234-6602 Cover (7) Screws
Remove screws (7) .
Illustration 5 g03085657
(8) Connectors at key switch panel (9) Connector for the seat heater
Remove cover (6) and all parts attached to the cover. While removing the cover, disconnect connectors (9). If the seat heater attachment is mounted, disconnect connector (8) as well.
Illustration 6 g03085678
(10) 163-6795 Cable Strap (11) Two 7K-1181 Cable Strap (12) 3S-2093 Cable Strap
Remove straps (10), (11), and (12) .
Illustration 7 g03085759
(13) Screws (14) Plate containing back-up switches
Remove screws (13), plate (14), and the 259-4877 Console Harness As .Note: When the new 373-8980 Console Harness As is used, the following parts are no longer required and should be discarded: 283-3074 Toggle Switch and 251-0602 Bracket .Installation Procedure
Prepare new 373-8980 Console Harness As for installation. Secure the harness with four straps. After securing the harness, cut all the surplus off the straps.
Illustration 8 g03085918
(1) 163-6795 Cable Strap (2) 3S-2093 Cable Strap
Secure the connectors to the wiring harness using two straps (1). Attach strap (2) .
Illustration 9 g03085856
(3) 3S-2093 Cable Strap (4) 3E-9375 Conduit
Wrap the wire with conduit (4) from the edge of a green tape toward the connector. Secure the wire with strap 3.
Install the harness into the same position as the harness that was removed. If the seat heater attachment is mounted, connect the connector of to the attachment.
Secure the harness with a 3S-2093 Cable Strap and two 7K-1181 Cable Strap in the same location that the straps were removed. After securing the harness, cut all the surplus from the straps.
Put five connectors on the new harness through the hole in the cab and out to the platform.
Connect the connectors at the key switch panel. Attach the tip of 163-6795 Cable Strap into the bracket and reinstall the 234-6602 Cover
Reinstall the six screws and the 234-6610 Cover
Reinstall the 234-6608 Cover and the 234-6609 Cover . Also, reinstall the two screws at the foot of the armrest.
Connect the five connectors at the platform.
Caterpillar parts catalog:
Caterpillar parts catalog
- 219-3502: MUFFLER & CONVERTER GP » SEBP36060184
- 219-3502: MUFFLER & CONVERTER GP » SEBP36070168
- 219-3502: MUFFLER & CONVERTER GP » SEBP68990129
Parts muffler Caterpillar catalog:
2193502 MUFFLER & CONVERTER GP
AD45, AD45B, AD55, AE40 II
AD45, AD45B, AD55, AE40 II
2621684 MUFFLER AS
1231323 MUFFLER AS
1231322 MUFFLER AS
2177038 MUFFLER AS
1126590 MUFFLER AS
1519498 MUFFLER AS
3800109 MUFFLER AS