2579035 MUFFLER & CONVERTER AS Caterpillar parts
C7
Rating:
Alternative (cross code) number:
CA2579035
257-9035
2579035
CA2579035
257-9035
2579035
Weight: 65 pounds 29 kg.
Information:
BODY DIAMETER/WIDTH
281.4
mm
BODY LENGTH
944.9
mm
INLET ID
127.64
mm
OUTLET OD
127.64
mm
OVAL HEIGHT
0
mm
OVERALL LENGTH
944.9
mm
PROTECTIVE SHIELD
N
WITH EJECTOR
N
WITH MOUNTING BRACKET
N
WITH OUTER WRAP
N
TRUCK ENGINE,
This part in 2 request:
Show.
This information for suppliers only!
2025-04-01
2022-07-18
Compatible equipment models: 2579035:
Number on catalog scheme:
1
For full view, you need register
Caterpillar parts catalog:
Information:
1. Before assembly put five discs (3) and six plates (5) in SAE 50 oil.2. When adapter assembly (2) is connected to the final drive, be sure that the two 5/8 in. threaded holes are at the bottom (down.).3. Assemble brake housing (1) and its parts to adapter assembly (2).4. Tighten four bolts (7) evenly, by hand, until compression of the spring begins.5. Use a wrench and tighten bolts (7) evenly by turning one turn at a time. Tighten bolts (7) to ... 200 25 N m (150 20 lb.ft.)6. This procedure is used to make sure that piston (4) goes into housing (1) straight. If piston (4) does not go into housing (1) correctly, the brake will be held in a BRAKE ON position.7. When bolts (7) are tightened to their correct torque, check to be sure that piston (4) is straight in housing (1).8. If the piston is not straight, washer (6) will be bent in the middle. Check the washer with a straight edge.9. If washer (6) is bent, remove housing (1) and piston (4).10. Inspect all parts for damage.11. Install new parts if damage is seen, install a new washer (6)
