MUFFLER AS 2993232 - Caterpillar

Illustration 1 g03329688
Table 1
Specification for 346-7171 Hoe Stick Gp, 346-7176 Hoe Stick Gp, and 346-7179 Hoe Stick Gp
Item Qty Part Number Specification Description
All bores must be free of paint. Coat all bores for the pins, the stick, the upper frame, and cylinder pin bores with 5P-0960 Grease Cartridge.
1 - - The stick cylinder must be assembled in order to orient the grease zerk, as shown.
2 1 107-9852 Pin As Diameter is 69.850 0.025 mm (2.7500 0.0010 inch).
3 1 4I-4811 Pin As Diameter is 69.850 0.025 mm (2.7500 0.0010 inch).
4 2 357-5709 Bushing(1) Inside diameter before assembly is 90.385 0.030 mm (3.5585 0.0012 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
5 2 229-1096 Bushing(1) Inside diameter before assembly is 70.17 0.04 mm (2.763 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
6 2 228-5614 Bushing(1) Inside diameter before assembly is 70.17 0.04 mm (2.763 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
7 2 166-1495 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seals so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
8 4 235-7679 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seals so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
(1) Install the bushing in the bore so that the part number is facing outward.