MUFFLER AS. INCLUDING:- 2U8426 - Caterpillar

2U8426 MUFFLER AS. INCLUDING:- Caterpillar parts D250D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2U8426
2U-8426
2U8426

Caterpillar 2U8426 MUFFLER AS. INCLUDING:-

Weight: 20 pounds 9 kg.

Information:

BODY DIAMETER/WIDTH 209.6 mm

BODY LENGTH 508 mm

INLET ID 102.11 mm

OUTLET OD 102.11 mm

OVAL HEIGHT 292 mm

OVERALL LENGTH 591 mm

PROTECTIVE SHIELD N

WITH EJECTOR N

WITH MOUNTING BRACKET N

WITH OUTER WRAP N

Buy MUFFLER AS. INCLUDING:- 2U8426 Caterpillar genuine, new aftermarket tractor parts with delivery
ARTICULATED TRUCK,

Compatible equipment models: 2U8426:

ARTICULATED TRUCK D250D Caterpillar

Number on catalog scheme: 1

Caterpillar 2U8426 Parts scheme MUFFLER AS. INCLUDING:-

For full view, you need register

Information:

Removal Procedure
Note: Sit in the operator station and perform the following steps in order to release the hydraulic system pressure.
Lower the armrest.
Illustration 1 g00941624
Turn the engine start switch key (1) to the ON position and disengage parking brake (2) .
Illustration 2 g00941626
Press each side of auxiliary hydraulic control switch (3) for one to two seconds in order to release the auxiliary system pressure. Keep joystick control (4) in the NEUTRAL position while you press auxiliary hydraulic control switch (3) .
Engage parking brake (2). Refer to illustration 1.
Start the engine and run the engine for at least 15 seconds in order to charge the accumulator.
Stop the engine.
Immediately turn engine start switch key (1) to the ON position and disengage parking brake (2). Refer to illustration 1.
Illustration 3 g00941628
Move joystick controls (4) and (5) through all of the operating positions in order to release the pressure in the hydraulic system.
Turn engine start switch key (1) to the OFF position. The pressure in the hydraulic system has now been relieved. Refer to illustration 1.