2W3428 MUFFLER AS Caterpillar parts
235
Rating:
Alternative (cross code) number:
CA2W3428
2W-3428
2W3428
CA2W3428
2W-3428
2W3428
Weight: 68 pounds 30 kg.
Information:
BODY DIAMETER/WIDTH
270
mm
BODY LENGTH
660.4
mm
INLET ID
114.81
mm
OUTLET OD
130.81
mm
OVAL HEIGHT
397
mm
OVERALL LENGTH
1097.3
mm
PROTECTIVE SHIELD
N
WITH EJECTOR
N
WITH MOUNTING BRACKET
Y
WITH OUTER WRAP
Y
EXCAVATOR,
Related part:
2W3428
MUFFLER-YM
2982784
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 2W3428 Muffler Assembly for Model 235
CTP For model 235 || Sold in each || Easy in-and-out fit
CTP For model 235 || Sold in each || Easy in-and-out fit
CTP 2W3428 Muffler Assembly for Model 235
CTP For model 235 || Sold in each || Easy in-and-out fit
CTP For model 235 || Sold in each || Easy in-and-out fit
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 2W3428:
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01241760
Disconnect harness assembly (2).
Remove bolt (3) and camshaft position sensor (1).
Remove the O-ring seal from camshaft position sensor (1). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01241760
Install a new O-ring seal on camshaft position sensor (1). Lubricate the O-ring seal with clean engine oil.
Position camshaft position sensor (1) in the housing and install bolt (3).
Connect harness assembly (2).
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01241760
Disconnect harness assembly (2).
Remove bolt (3) and camshaft position sensor (1).
Remove the O-ring seal from camshaft position sensor (1). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01241760
Install a new O-ring seal on camshaft position sensor (1). Lubricate the O-ring seal with clean engine oil.
Position camshaft position sensor (1) in the housing and install bolt (3).
Connect harness assembly (2).
Caterpillar parts catalog:
Parts muffler Caterpillar catalog:
215, 225
245B
245B
7E5663
MUFFLER AS
225D, 231D, AP-655C
225D, 231D, AP-655C
235B, 235C
