2W3597 MUFFLER AS Caterpillar parts
D4H, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II
Rating:
Alternative (cross code) number:
CA2W3597
2W-3597
2W3597
CA2W3597
2W-3597
2W3597
Weight: 32 pounds 14 kg.
Information:
BODY DIAMETER/WIDTH
209.6
mm
BODY LENGTH
596.9
mm
INLET ID
102.39
mm
OUTLET OD
105.23
mm
OVAL HEIGHT
292
mm
OVERALL LENGTH
0
mm
PROTECTIVE SHIELD
N
WITH EJECTOR
N
WITH MOUNTING BRACKET
Y
WITH OUTER WRAP
N
TRACK SKIDDER, TRACK-TYPE TRACTOR,
Related part:
2W3597
MUFFLER-AS-YM
3975044
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
2W3597 Muffler Assembly Fits Caterpillar Skidders D4HTSK III D5HTSK II 54H
Generic Package included: 1x 2W3597 Muffler Assembly Fits Caterpillar Skidders D4HTSK III D5HTSK II 54H as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
Generic Package included: 1x 2W3597 Muffler Assembly Fits Caterpillar Skidders D4HTSK III D5HTSK II 54H as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
For 2W3597 Muffler Assembly Fits D4HTSK III D5HTSK II 54H 4S 5P 5S 5 D4H XL
RATION For 2W3597 Muffler Assembly Fits D4HTSK III D5HTSK II 54H 4S 5P 5S 5 D4H XL || Muffler assembly designed for models D4HTSK III, D5HTSK II, 54H, 4S, 5P, 5S, 5, and D4H XL, compatible with MPN 2W3597. || Ensures efficient flow and noise reduction, maintaining optimal performance and engine functionality for the specified machinery models. || Elevate your garden beauty with our precision garden replacement parts. || To ensure compatibility, please check the product dimensions and review the provided images closely.
RATION For 2W3597 Muffler Assembly Fits D4HTSK III D5HTSK II 54H 4S 5P 5S 5 D4H XL || Muffler assembly designed for models D4HTSK III, D5HTSK II, 54H, 4S, 5P, 5S, 5, and D4H XL, compatible with MPN 2W3597. || Ensures efficient flow and noise reduction, maintaining optimal performance and engine functionality for the specified machinery models. || Elevate your garden beauty with our precision garden replacement parts. || To ensure compatibility, please check the product dimensions and review the provided images closely.
For Interchangeable Muffler Assembly 2W3597 Fits Tractor Model(s): 4S, 5P, 5S, 5
RATION For Interchangeable Muffler Assembly 2W3597 Fits Tractor Model(s): 4S, 5P, 5S, 5 || Interchangeable muffler assembly 2W3597 is compatible with tractor models 4S, 5P, 5S, and 5, ensuring a perfect fit for these specific models. || This muffler assembly is designed to provide reliable performance and durability, meeting the requirements of various tractor applications. || Elevate your garden beauty with our precision garden replacement parts. || To ensure compatibility, please check the product dimensions and review the provided images closely.
RATION For Interchangeable Muffler Assembly 2W3597 Fits Tractor Model(s): 4S, 5P, 5S, 5 || Interchangeable muffler assembly 2W3597 is compatible with tractor models 4S, 5P, 5S, and 5, ensuring a perfect fit for these specific models. || This muffler assembly is designed to provide reliable performance and durability, meeting the requirements of various tractor applications. || Elevate your garden beauty with our precision garden replacement parts. || To ensure compatibility, please check the product dimensions and review the provided images closely.
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 2W3597:
Information:
Transmission ET Fill Calibration Procedure
References
The following requirements must be met in order to ensure that transmission calibration process can be completed with ET:
Laptop computer with serial port
Communications adapter
ET 2005B or a later version
A flash file (.fls) must be loaded into the A4 Electronic Control Module on the machine.If the Information System Builder is required, then the following additional files will also be required:
An ELF file (.elf) must be used to communicate with a given Flash File.
The Information System Builder also requires a "setup" File that needs to be created or loaded into the Information System Builder so that instructions can be uploaded into the ECU.ET Transmission Calibration
ET Clutch Calibration Procedure
The ET calibration program is set up to calibrate the clutch fill time, for a given clutch. The program will also provide feedback if errors occur during the calibration process.This procedure should be carried out when the following occurs:
Commissioning procedure for the rig
Replacing the ECM
Replacing an ECPC valve
Replacing the transmissionCalibrating
Operate the transmission in order to warm the oil to normal operating temperature.
Disconnect the drive shaft. The transmission output will turn during calibration.
Connect and Open ET.
Click on the "SERVICE" menu and then click Calibrations.
Illustration 1 g01275180
Select Transmission Fill Calibration.
Illustration 2 g01275183
Verify that the following conditions are met:
Transmission Oil Temperature is in normal range, above 70 °C (158 °F) and below 87 °C (189 °F). During the calibration, this temperature must be above 65 °C (149 °F) and this temperature must be below 96 °C (205 °F).
The engine is at idle.
Neutral is selected.
Illustration 3 g01275192
If these conditions are met click "NEXT".
Illustration 4 g01275193
It takes approximately 15 m
References
The following requirements must be met in order to ensure that transmission calibration process can be completed with ET:
Laptop computer with serial port
Communications adapter
ET 2005B or a later version
A flash file (.fls) must be loaded into the A4 Electronic Control Module on the machine.If the Information System Builder is required, then the following additional files will also be required:
An ELF file (.elf) must be used to communicate with a given Flash File.
The Information System Builder also requires a "setup" File that needs to be created or loaded into the Information System Builder so that instructions can be uploaded into the ECU.ET Transmission Calibration
ET Clutch Calibration Procedure
The ET calibration program is set up to calibrate the clutch fill time, for a given clutch. The program will also provide feedback if errors occur during the calibration process.This procedure should be carried out when the following occurs:
Commissioning procedure for the rig
Replacing the ECM
Replacing an ECPC valve
Replacing the transmissionCalibrating
Operate the transmission in order to warm the oil to normal operating temperature.
Disconnect the drive shaft. The transmission output will turn during calibration.
Connect and Open ET.
Click on the "SERVICE" menu and then click Calibrations.
Illustration 1 g01275180
Select Transmission Fill Calibration.
Illustration 2 g01275183
Verify that the following conditions are met:
Transmission Oil Temperature is in normal range, above 70 °C (158 °F) and below 87 °C (189 °F). During the calibration, this temperature must be above 65 °C (149 °F) and this temperature must be below 96 °C (205 °F).
The engine is at idle.
Neutral is selected.
Illustration 3 g01275192
If these conditions are met click "NEXT".
Illustration 4 g01275193
It takes approximately 15 m
Caterpillar parts catalog:
Parts muffler Caterpillar catalog:
6I2070
MUFFLER GP
D4H, D4H XL, D4HTSK III
D4H, D4H XL, D4HTSK III
6I1780
MUFFLER GP
D4H XL
D4H XL
7N1118
MUFFLER GP
D5H, D5H XL, D5HTSK II
D5H, D5H XL, D5HTSK II
1W6048
MUFFLER AS
D5H, D5H XL, D5HTSK II
D5H, D5H XL, D5HTSK II
6I2518
MUFFLER AS
D4H XL
D4H XL
578, 583R, D8N, D8R, D8R II
589, D8L, D9R
973C, D6R, D6R II, D6R STD
2265612
MUFFLER AS
D6R II
D6R II
6I2518
MUFFLER AS
D4H XL
D4H XL
D5B, D5E
140G, 14G, D6C, D6D, D6E SR
D6D, D6D SR, D6E SR
D6H, D6H XL, D6H XR, D6R
D6H, D6H XL, D6H XR