MUFFLER 2W4071 - Caterpillar

2W4071 MUFFLER Caterpillar parts 3176B, 3176C, 3196, 3304, 3306, 3306B, 3406, 3406B, 3406C, 3508B, C-10, C-12, G3306, G3406, SBF214, SUF557

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2W4071
2W-4071
2W4071

Weight: 50 pounds 22 kg.

Information:

BODY DIAMETER/WIDTH 406.4 mm

BODY LENGTH 838.2 mm

INLET ID 127 mm

OUTLET OD 127 mm

OVAL HEIGHT 0 mm

OVERALL LENGTH 990.6 mm

PROTECTIVE SHIELD N

WITH EJECTOR N

WITH MOUNTING BRACKET Y

WITH OUTER WRAP N

Buy MUFFLER 2W4071 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE, PUMPER,

This part in 2 request: Show. This information for suppliers only!

#884642 2W4071

2022-05-17

#526472 2W4071

2020-09-15

Compatible equipment models: 2W4071:

GAS ENGINE G3306 G3406

GEN SET ENGINE 3304 3306 3306B 3406B 3406C 3508B

GENERATOR SET G3306 G3406

INDUSTRIAL ENGINE 3176B 3176C 3196 3304 3306 3406 3406B 3406C C-10 C-12

MARINE ENGINE 3304 3406B

PUMPER SBF214 SUF557 Caterpillar

Number on catalog scheme: 1

For full view, you need register

Information:

Removal Procedure
Start By:
If the engine is equipped with a turbocharger, remove the turbocharger. Refer to Disassembly and Assembly, " Turbocharger, Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The two cylinder, the three cylinder and the four cylinder engines have different exhaust manifolds. The removal procedure is similar for all models.
Illustration 1 g01326567
Typical example
Loosen nuts (5) and bolts (6). Note: In order to prevent distortion of the exhaust manifold, loosen the outer fasteners first.
Remove nuts (5) and bolts (6). Note: Identify bolts of different lengths so that the bolts can be installed in the correct positions.
Remove exhaust manifold (4) from cylinder head (1). Note the orientation of the exhaust manifold for installation.
Remove gasket (3) from cylinder head (1).
If necessary, remove exhaust manifold studs (2) from cylinder head (1). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The two cylinder, the three cylinder and the four cylinder engines have different exhaust manifolds. The installation procedure is similar for all models.
Ensure that the mating surfaces of the cylinder head and the exhaust manifold are clean and free from damage.
Illustration 2 g01326567
Typical example
If necessary, install exhaust manifold studs (2) to cylinder head (1).
Install a new exhaust manifold gasket (3) to cylinder head (1).
Align exhaust manifold (4) with studs (2) and install the exhaust manifold to cylinder head (1). Note: Ensure that the exhaust manifold is installed in the correct orientation.
Install nuts (5) and bolts (6) finger tight. Note: Ensure that bolts of different lengths are installed in the correct positions.
For C0.5, C0.7, C1.1, C1.5 and C1.6 engines, tighten nuts (5) and bolts (6) to a torque of 10 N m (89 lb in). For C2.2 engines, tighten nuts (5) and bolts (6) to a torque of 25 N m (18 lb ft).Note: On three cylinder engines and four cylinder engines, tighten the inner bolts first.End By:
If the engine is equipped with a turbocharger, install the turbocharger. Refer to Disassembly and Assembly, " Turbocharger, Remove and Install".