MUFFLER AS 3602695 - Caterpillar

3602695 MUFFLER AS Caterpillar parts 320D GC, 320D L, 323D L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3602695
360-2695
3602695

Weight: 88 pounds 39 kg.

Buy MUFFLER AS 3602695 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 3602695:

EXCAVATOR 320D GC 320D L 323D L Caterpillar

Number on catalog scheme: 1

Caterpillar 3602695 Parts scheme MUFFLER AS

For full view, you need register

Information:

At operating temperature, the hydraulic oil tank is hot and under pressure. Hot oil can cause burns. To prevent possible personal injury, release the pressure in the hydraulic system before and hydraulic lines or components are disconnected or removed.
3. Release the pressure in the hydraulic system as follows:a. Shut off the engine.b. Move the control levers through their full travel strokes. This will relieve any pressure that may be present in the pilot system.c. Slowly loosen the air breather cap on the hydraulic oil tank to release the pressure.d. Tighten the air breather cap on the hydraulic oil tank.e. The pressure in the hydraulic system has now been released. Lines and components can now be removed. 4. Disconnect two hydraulic hose assemblies (1). 5. Remove cotter pin (3) and pin (2).6. Remove cotter pin (5) and pin (4). Remove coupler cylinder (6). Lubricate pins (2) and (4) with 5P-0960 Molybdenum Grease before installation. Install the coupler cylinder in the reverse order of removal.7. Separate the steering frame lock link. See "Separate & Connect Steering Frame Lock Link" in this module.