MUFFLER 3724991 - Caterpillar

Illustration 1 g00637941
Inspection points for the walk-around inspection.
(A) Ground level controls
(B) Ladders
(C) Radiator
(D) Engine
(E) Left front tire
(F) Left steering cylinder, tie rod, and front suspension cylinder
(G) Power train
(H) Fuel tank
(I) Left hoist cylinder
(J) Frame and body
(K) Rear tires
(L) Rear axle
(M) Right hoist cylinder
(N) Hydraulic tank
(O) Right steering cylinder, tie rod, and front suspension cylinder
(P) Automatic lubricant reservoir
(Q) Right front tire
(R) Platform
Illustration 2 g00604320 (A) Inspect the ground level controls. Make sure that covers (1) for the engine shutdown switch and the battery disconnect switch are down. Inspect warning light (2). Inspect cover (3) on the RS-232 connection for the VIMS. (B) Inspect the ladders. Also inspect the front operating lights. (C) Inspect the radiator. Check for leaks. Remove any debris that could block the air flow.
Illustration 3 g00639638 (D) Inspect the engine. Use dipstick (4) to check the oil level in the sump of the engine. Check for oil leaks and coolant leaks. Drain the moisture and sediment from the air tanks. (E) Inspect the left front tire. Check the tire inflation. Make sure that you check inside the tire for damage or for wear. Inspect the tire treads for damage. Remove large rocks from the treads. Check the wheel bearing for bolts that are loose or missing.Note: Rust behind a bolt may indicate that the bolt is loose. Shiny metal areas around a bolt may indicate that the bolt is loose. (F) Inspect the steering cylinders