AVSPARE.COM
parts catalog

MUFFLER AS 4594144 - Caterpillar


4594144 MUFFLER AS Caterpillar parts
Rating:
51
Alternative (cross code) number:
CA4594144
459-4144
4594144
Caterpillar 4594144 MUFFLER AS
Weight: 121 pounds 54 kg.

Buy MUFFLER AS 4594144 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 3
  For full view, you need register

Information:

programmable engine monitoring system is provided. The Electronic Control Module (ECM) can monitor parameters. The ECM can initiate an action if a specific parameter for engine operation exceeds an acceptable range. Three possible actions from the ECM may be available: "", "DERATE" and "SHUTDOWN". All actions are not available for some parameters. The Cat® Electronic Technician (ET) is used to select the actions from the ECM. The Cat ET will program the level for monitoring and the delay times for each action.Note: The parameters must be programmed with the Cat ET when the customer requires any of the parameters to be different from the factory settings.Monitoring system parameters must be programmed with the Cat ET. In order to program the monitoring system parameters, select "monitoring" from the Cat ET menu. Screens in Cat ET provide guidance through the steps for programming in order to select the "OFF//DERATE/SHUTDOWN" options that are available for the selected parameter. Screens in Cat ET also provide guidance for changing "/DERATE/SHUTDOWN" setpoints. Some parameters will require a password to be programmed. Refer to the Cat ET and the Troubleshooting manual for additional information on programming the monitoring system parameters. The engine monitoring system is enabled after the engine is started. When the engine rpm exceeds a point that is 50 rpm below the low idle speed the ECM checks the parameter levels. The ECM checks the parameter levels in order to determine if the levels exceed the setpoints for the monitoring system.Any action of the monitoring system will log an event. These actions are "", "DERATE" or "SHUTDOWN". A warning event will still be logged if the setpoint is exceeded and these actions are turned off.Any failure of a sensor will result in the disabling of the corresponding portion of the monitoring system. There will be an active diagnostic for the failed sensor, but an event is not logged. Refer to Troubleshooting for additional information on sensors.

Caterpillar parts catalog:

Caterpillar parts catalog
374F L Excavator MFL00001-UP (MACHINE) POWERED BY C15 Engine
390F L Excavator HSM00001-UP (MACHINE) POWERED BY C18 Engine
390F L Excavator TYE00001-UP (MACHINE) POWERED BY C18 Engine
374F L Excavator AP400001-UP (MACHINE) POWERED BY C15 Engine
374F L Excavator AT200001-UP (MACHINE) POWERED BY C15 Engine
390F L Excavator GAY00001-UP (MACHINE) POWERED BY C18 Engine
390F L Excavator HJD00001-UP (MACHINE) POWERED BY C18 Engine
374F L Excavator NFJ00001-UP (MACHINE) POWERED BY C15 Engine


Parts muffler Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.