MUFFLER AS 8N8730 - Caterpillar

Illustration 30 g00447979LOCK (1) - Rotate the lever lock and place the pin into the hole in the bracket. The third function lever will be locked into the OFF position.UNLOCK (2) - Move the pin out of the bracket and rotate the lever lock backward. The third function lever can then be moved.Creeper Speed Control (If Equipped)
Illustration 31 g01040733
Speed Select Switch
Select the speed range with the speed select switch.
Illustration 32 g00766168
Creeper Speed Control
In the slow mode, the creeper speed control allows the operator to infinitely vary the ground speed of the machine. The ground speed can be varied between 0 to 9 km/h (0 to 5.6 mph).In the fast mode, the creeper speed control allows the operator to infinitely vary the ground speed of the machine. The ground speed can be varied between 0 to 35 km/h (0 to 21.5 mph) for the wheel loader. The ground speed can be varied between 0 to 32 km/h (0 to 19.8 mph) for the integrated toolcarrier.Hydraulic Lockout Control
Hydraulic Lockout Lever (If Equipped)
Illustration 33 g00401245
Hydraulic Lever Lock in the LOCKED position
LOCK - Rotate the handle all the way to the rear in order to lock the hydraulic control levers.
Illustration 34 g00401244
Hydraulic Lever Lock in the UNLOCKED position
UNLOCK - Rotate the handle all the way forward in order to unlock the hydraulic control levers.Note: The detents for the loader linkage will not operate unless the hydraulic control lever lock is fully in the UNLOCKED position.Parking Brake Control
Do not engage the parking brake while the machine is moving unless the primary service brake fails. The use of the parking brake as a service brake in regular operation will cause severe damage to the brake system.
Illustration 35 g01041167Parking Brake - The parking brake lever is located on the left side of the seat. Use the parking brake after the machine is stopped.Parking Brake Engaged - Pull up on the parking brake lever in order to engage the parking brake. The hydrostatic drive will shift to NEUTRAL. The machine will not move. The alert indicator for the parking brake will come on. The alert indicator is located on the right side of the steering column.Parking Brake Disengaged - Move the directional control lever and move the direction control switch (if equipped) into NEUTRAL. Push the button on the top of the parking brake lever. Lower the parking brake lever in order to release the parking brake.Note: Move the direction control lever or move the direction control switch (if equipped) into the desired direction in order for the hydrostatic drive to be activated.Service Brake Control
Illustration 36 g00417317
Brake Pedals - Use the left brake pedal or the right brake pedal to slow down the machine's ground speed for normal braking. Release the pedals in order to release the service brakes.Inching Mode
Depress the brake pedal for one to two inches. The first one to two inches of movement of the brake pedal activates the inching mode for the brakes.The inching mode enables you to reduce the machine speed to zero while the engine is up