AVSPARE.COM
parts catalog

MUFFLER B137901 - Caterpillar



B137901 MUFFLER Caterpillar parts CB-414 MUFFLER
Rating:
39
Alternative (cross code) number:
CAB137901
B13-7901
B137901
Caterpillar B137901 MUFFLER

Buy MUFFLER B137901 Caterpillar genuine, new aftermarket tractor parts with delivery
VIBRATORY COMPACTOR,

Compatible equipment models: B137901:

VIBRATORY COMPACTOR  CB-414   Caterpillar
Number on catalog scheme: 9
  
  For full view, you need register

Information:

Removal Procedure
Illustration 1 g01152250
Disconnect tube assembly (3) and tube assembly (5) .
Attach a suitable lifting device to exhaust manifold (2) and the turbocharger. The weight of exhaust manifold (2) and the turbocharger is approximately 40 kg (88 lb).
Remove bolts (1) and locks (4) .
Remove exhaust manifold (2), the turbocharger, and the gaskets from the cylinder head assembly.Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     2P-2333     High Temperature Sealer     1    
B     5P-3931     Anti-Seize Compound     1    
Excessive use of sealant can cause damage to components.To avoid component damage use only the amount of sealant necessary for the application.
Illustration 2 g01152250
Apply Tooling (A) to the outside diameter of the male ends of exhaust manifold (2). Assemble exhaust manifold (2) and remove the excess sealer from the joints.
Apply Tooling (B) to the threads of bolts (1). Attach a suitable lifting device to exhaust manifold (2) and the turbocharger. The weight of exhaust manifold (2) and the turbocharger is approximately 40 kg (88 lb). Position the gaskets, exhaust manifold (2), and the turbocharger on the cylinder head assembly. Install locks (4) and bolts (1) .
Connect tube assembly (3) and tube assembly (5) .
Illustration 3 g01152252
Tighten Bolt (1) through Bolt (12) in a numerical sequence.Tighten bolts to the following torque. ... 4 1 N m (35 9 lb in)
Tighten Bolt (1) through Bolt (12) again in a numerical sequence.Tighten bolts to the following torque. ... 45 5 N m (33 4 lb ft)
Bend the locking tab over the flat of each bolt head.Note: Prior to starting or running the engine, allow the sealant in the exhaust manifold joints to air dry for 24 hours.

Caterpillar parts catalog:

Caterpillar parts catalog
CB-414 VIBRATORY COMPACTOR 6KD00001-UP (MACHINE) POWERED BY 4239D ENGINE


Parts muffler Caterpillar catalog:

E650025 MUFFLER
PS-130, PS-180
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.