1714093 NOZZLE AS-FUEL INJECTION Caterpillar parts
611, 615C, 966F, 966F II, 972G
Rating:
Alternative (cross code) number:
CA1714093
171-4093
1714093
CA1714093
171-4093
1714093
Weight: 0.60 pounds 0 kg.
WHEEL LOADER, WHEEL TRACTOR,
Related part:
1714093
NOZZLE AS-FUEL V
10R5578
R
Compatible equipment models: 1714093:
Information:
Installation Procedure
Do not operate the wiper motor before the wiper arm assembly is installed.A new wiper motor is preset in the parked position. If the wiper motor is operated before installation of the wiper arm assembly, misalignment will occur. This can cause damage to the wiper motor, the wiper arm assembly, and/or the window.Do not manually rotate the wiper arm assembly on the shaft.
Illustration 1 g01065693
Illustration 2 g01065694
Position motor assembly (12). Install bolts (13) .
Install harness assembly (11) .
Illustration 3 g01065692
Install filter assembly (9) into cover assembly (10). Position cover assembly (10) into the cab. Install screws (8) .
Illustration 4 g00491931
Install screws (7) .
Illustration 5 g01067913
Install screw (6) .
Illustration 6 g00491879
Install screws (5) .
Illustration 7 g00491877
Install nut (4) .
Illustration 8 g00491872
Install cover (3) .
Push the wiper arm assembly straight onto the tapered shaft. If the wiper arm assembly is not installed straight when the shaft turns, the splines will be improperly formed and damage will occur.
Do not operate windshield wiper motor prior to installing the wiper arm assembly. Wiper motor is preset to the park position. If the wiper motor is rotated before the wiper arm assembly is installed, the wiper motor will be misaligned. Do not manually rotate wiper arm on wiper motor shaft before the nut is torqued or after the nut is torqued.
Illustration 9 g00491867
Install wiper arm assembly (1) .
Position wiper arm assemblies (1) on the tapered shafts within 5 degrees of the vertical centerline. Install the lock washers and nuts (2). Hand tighten the nut on the shaft. If the wiper arm assembly is not positioned correctly, remove the wiper arm assembly from the shaft and reposition the wiper arm assembly.
Tighten nuts (2) to a torque of 12 3 N m (9 2 lb ft).
Close the covers on the wipers.
Illustration 10 g00488225
Note: Do not use petroleum lubricants on the hose ends. Do not stretch the hose between connection points.
Connect hose to the fitting. Make sure that you install the hose to Dimension (A), as shown. Dimension (A) equals 1.0 1.0 mm (0.04 0.04 inch).
Do not operate the wiper motor before the wiper arm assembly is installed.A new wiper motor is preset in the parked position. If the wiper motor is operated before installation of the wiper arm assembly, misalignment will occur. This can cause damage to the wiper motor, the wiper arm assembly, and/or the window.Do not manually rotate the wiper arm assembly on the shaft.
Illustration 1 g01065693
Illustration 2 g01065694
Position motor assembly (12). Install bolts (13) .
Install harness assembly (11) .
Illustration 3 g01065692
Install filter assembly (9) into cover assembly (10). Position cover assembly (10) into the cab. Install screws (8) .
Illustration 4 g00491931
Install screws (7) .
Illustration 5 g01067913
Install screw (6) .
Illustration 6 g00491879
Install screws (5) .
Illustration 7 g00491877
Install nut (4) .
Illustration 8 g00491872
Install cover (3) .
Push the wiper arm assembly straight onto the tapered shaft. If the wiper arm assembly is not installed straight when the shaft turns, the splines will be improperly formed and damage will occur.
Do not operate windshield wiper motor prior to installing the wiper arm assembly. Wiper motor is preset to the park position. If the wiper motor is rotated before the wiper arm assembly is installed, the wiper motor will be misaligned. Do not manually rotate wiper arm on wiper motor shaft before the nut is torqued or after the nut is torqued.
Illustration 9 g00491867
Install wiper arm assembly (1) .
Position wiper arm assemblies (1) on the tapered shafts within 5 degrees of the vertical centerline. Install the lock washers and nuts (2). Hand tighten the nut on the shaft. If the wiper arm assembly is not positioned correctly, remove the wiper arm assembly from the shaft and reposition the wiper arm assembly.
Tighten nuts (2) to a torque of 12 3 N m (9 2 lb ft).
Close the covers on the wipers.
Illustration 10 g00488225
Note: Do not use petroleum lubricants on the hose ends. Do not stretch the hose between connection points.
Connect hose to the fitting. Make sure that you install the hose to Dimension (A), as shown. Dimension (A) equals 1.0 1.0 mm (0.04 0.04 inch).
Caterpillar parts catalog:
Parts nozzle Caterpillar catalog:
0R3591
NOZZLE AS-FUEL VALVE
235B, 350, 572R, 627B, 627E, 627F, 815F, 816B, 966F, 966F II, 972G, 973, D7G, D7H, D7R
235B, 350, 572R, 627B, 627E, 627F, 815F, 816B, 966F, 966F II, 972G, 973, D7G, D7H, D7R
1705181
NOZZLE AS-FUEL VALVE
235B, 3306, 3306B, 3306C, 350, 545, 572R, 627B, 627F, 627G, 814F, 815F, 816F, 966F, 966F II, 966G, 972G, 973, 973C, D7G, D7G2, D7H, D7R, R1300, R1300G
235B, 3306, 3306B, 3306C, 350, 545, 572R, 627B, 627F, 627G, 814F, 815F, 816F, 966F, 966F II, 966G, 972G, 973, 973C, D7G, D7G2, D7H, D7R, R1300, R1300G
1677489
NOZZLE AS-FUEL INJECTION
3306, 3306B, 611, 615C, 637E, 637G, 65C, 970F, D250E, D250E II, D300E, D300E II
3306, 3306B, 611, 615C, 637E, 637G, 65C, 970F, D250E, D250E II, D300E, D300E II
8T1118
NOZZLE AS-WASHER
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 414E, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428B, ...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 414E, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428B, ...
0R3418
NOZZLE AS-FUEL INJECTION
140G, 143H, 160H, 615C, 966F, 966F II, 972G, D6H, D6H XL, D6H XR, D7G, D7H
140G, 143H, 160H, 615C, 966F, 966F II, 972G, D6H, D6H XL, D6H XR, D7G, D7H
1049450
NOZZLE AS-FUEL VALVE
966F II, 973, 973C
966F II, 973, 973C
4V3527
NOZZLE AS-WASHER
611, 613C II, 615C, 621E, 623E, 627E, 631E, 633E II, 637E, 814B, 815B, 826C, 834B, 836, 943, 950B, 953, 963, 966D, 980C, 988B, 992C
611, 613C II, 615C, 621E, 623E, 627E, 631E, 633E II, 637E, 814B, 815B, 826C, 834B, 836, 943, 950B, 953, 963, 966D, 980C, 988B, 992C
8T2449
NOZZLE AS-WASHER
611, 613C II, 615C, 623E, 627E, 637E, 784B, 784C
611, 613C II, 615C, 623E, 627E, 637E, 784B, 784C
1363190
NOZZLE AS-WASHER
320D FM, 320D FM RR, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 854G, 854K, 914G, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 9...
320D FM, 320D FM RR, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 854G, 854K, 914G, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 9...
1363195
NOZZLE AS-WASHER
621H, 623H, 627H, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 797, 797B, 824G II, 824H, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 914G, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928H...
621H, 623H, 627H, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 797, 797B, 824G II, 824H, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 914G, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928H...
10R5578
NOZZLE AS-FUEL VALVE
615C, 966F, 966F II, 972G
615C, 966F, 966F II, 972G
6V6797
NOZZLE AS
844, 854G, 910E, 916, 926, 936, 936F, 950F, 950F II, 960F, 966F, 966F II, 970F, 980F, 988F, 988F II, 990, 990 II, 992D, 992G, D10N, D10R, D11N, D11R, D9N, D9R, IT12B, IT14F, IT28
844, 854G, 910E, 916, 926, 936, 936F, 950F, 950F II, 960F, 966F, 966F II, 970F, 980F, 988F, 988F II, 990, 990 II, 992D, 992G, D10N, D10R, D11N, D11R, D9N, D9R, IT12B, IT14F, IT28
8T2449
NOZZLE AS-WASHER
611, 613C II, 615C, 623E, 627E, 637E, 784B, 784C
611, 613C II, 615C, 623E, 627E, 637E, 784B, 784C
5C9088
NOZZLE
920, 930
920, 930
7W7023
NOZZLE ASSEM.
953, R1700 II
953, R1700 II
3Y7016
NOZZLE
572G, 950, 966C
572G, 950, 966C
3Y7015
NOZZLE
572G, 950, 966C
572G, 950, 966C
1363195
NOZZLE AS-WASHER
621H, 623H, 627H, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 797, 797B, 824G II, 824H, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 914G, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928H...
621H, 623H, 627H, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 797, 797B, 824G II, 824H, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 914G, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928H...
1363190
NOZZLE AS-WASHER
320D FM, 320D FM RR, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 854G, 854K, 914G, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 9...
320D FM, 320D FM RR, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 854G, 854K, 914G, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 9...
1265972
NOZZLE
914G, IT14G
914G, IT14G
0R3421
NOZZLE AS-FUEL INJECTION
621F, 623E, 627F, 980C, 980F
621F, 623E, 627F, 980C, 980F
0R8786
NOZZLE AS-FUEL VALVE
621F, 623E, 623F, 627B, 627F, 814B, D400
621F, 623E, 623F, 627B, 627F, 814B, D400