NOZZLE AS-JET 8Y4408 - Caterpillar

Illustration 1 g06253412
Illustration 2 g06250752
Tightening Sequence
Table 1
Item Qty Part Specification Description
1 8 2N-2766 Locknut Before assembly, apply Loctite C5A copper antiseize to the threads.
Torque to 54 5 N.m (40 4 lb ft) in the numerical sequence shown in illustration 2.
Do not reuse.
Illustration 3 g06253470
Table 2
Item Qty Part Specification Description
2 2 189-5124 Compressor Clamp Assembly Use the following procedure to tighten the turbine clamp and compressor clamp assembly:
1. Tighten the clamp assembly to 14 1 N.m (124 9 lb in).
2. Gently tap all around the clamp assembly.
3. Again tighten the clamp assembly to 14 1 N.m (124 9 lb in).
3 2 385-4584 Turbine Clamp As