AVSPARE.COM
parts catalog

NUT CASTLE 0002580 - Caterpillar



0002580 NUT CASTLE Caterpillar parts NUT
Rating:
31
Alternative (cross code) number:
CA0002580
000-2580
0002580
Caterpillar 0002580 NUT CASTLE

Buy NUT CASTLE 0002580 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Accessing Configurations
Connect the ET to the machine. After communication has been established, the ET will list the electronic control modules that are on the machine. Choose the menu item "Hystat Trans D5". Select the drop-down menu that is called "Service". Then, select the "Configuration" function. The list of configurations will appear. From the list, select the desired item from the list. A service menu for "Change Parameter Value" will appear.
Illustration 1 g00789265
Typical ET screen for the "Change Parameter Value"
Table 1
Parameter Status    
Parameter     Default Status     Range    
"Product ID" (1)     PIN        
"Equipment ID" (2)     Dealer Optional     Dealer Optional    
"Maximum Forward Ground Speed" (3)    
9.0 km/h (5.6 mph)    
7.2 km/h (4.5 mph) to
9.7 km/h (6.0 mph)    
"Maximum Reverse Ground Speed" (4)    
9.7 km/h (6.0 mph)    
7.2 km/h (4.5 mph) to
9.7 km/h (6.0 mph)    
"Reverse Ground Speed as a Percentage of Forward" (5)     125 percent     80 to 200 percent    
"Parking Brake Lockout Status" (6)     "Not Locked Out"     "Not Locked Out" or "Locked Out"    
"Machine Acceleration/Deceleration Rate" (7)     "Medium - High"     "Low - Medium/Low - Medium/High - High"    
"Steering Response Rate Setting" (8)     "Medium "     "Low - Medium - High "    
"Steerring Modulation Setting" (9)     "Medium "     "Low - Medium - High "    
( 1 ) PIN
( 2 ) Equipment identification number
( 3 ) Maximum forward speed
( 4 ) Maximum reverse speed
( 5 ) The reverse speed is set as a percentage of the forward speed up to the maximum reverse ground speed.
( 6 ) This setup is used to lock out the parking brake for the transmission stall test. The parking brake is not allowed to be disengaged.
( 7 ) This setup is used to control the rate of acceleration for the machine and the rate of deceleration for the machine.
( 8 ) The speed with which the machine responds to steering commands.
( 9 ) The amount of relative modulation available in the working steering range.Note: The speed gauge maximum indicated speed is a function of the maximum forward ground speed setting. When the maximum forward ground speed is set at 7.2 km/h (4.5 mph), the gauge will indicate up to 2.25.


Parts nut Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.