AVSPARE.COM
parts catalog

NUT 0005559 - Caterpillar



0005559 NUT Caterpillar parts NUT
Rating:
26
Alternative (cross code) number:
CA0005559
000-5559
0005559
Caterpillar 0005559 NUT
Weight: 0.06 pounds 0 kg.

Buy NUT 0005559 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Illustration 1 g01045759
Remove adjusting mechanism (3) for the air conditioner compressor, if equipped. Loosen mounting bolt (2) for the air conditioner compressor. Remove drive belt (1) from the air conditioner compressor pulley so that the belt is now slack.
Rotate the air conditioner compressor out of the way. Temporarily tighten the mounting bolt for the air conditioner compressor.
Illustration 2 g01045812
Remove bolts (4) and (5) for the fan guard that are located on the left side of the engine compartment.
Illustration 3 g00832872
Loosen alternator mounting bolt (7).
Loosen adjusting bolt (6) for the alternator enough to push the alternator against the engine. Temporarily tighten the mounting bolt for the alternator.
Illustration 4 g00832874
Remove bolts (8) and (10) for the fan guard that are located on the right side of the engine compartment.
Remove lower fan guard (11) and then remove upper fan guard (9) .
Illustration 5 g01071430
Use an 8 mm socket in order to remove six screws (12) and the cover from fan (14) .
Use a 13 mm socket in order to remove four bolts (15), the fan, and spacer (13) .Installation Procedure
Illustration 6 g01071430
Place spacer (13) and fan (14) in position on the engine. Use a 13 mm socket in order to install four bolts (15) that secure the fan and the spacer in place.
Place the cover in position on the fan. Use an 8 mm socket in order to install six screws (12) that secure the cover to the fan.
Illustration 7 g00832874
Install upper fan guard (9) and then install lower fan guard (11) .
Install bolts (8) and (10) for the fan guard that are located on the right side of the engine compartment.Note: Do not tighten the bolts for the fan guard at this time.
Illustration 8 g00832872
Loosen adjusting bolt (6) for the alternator. Pull the alternator away from the engine to the original position. Adjust the alternator belt to the proper tension and tighten alternator mounting bolt (7). Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace".
Illustration 9 g01045812
Install bolts (4) and (5) for the fan guard that are located on the left side of the engine compartment.Note: Tighten all of the bolts for the fan guards at this time.
Illustration 10 g01045759
Loosen mounting bolt (2) for the air conditioner compressor. Rotate the air conditioner compressor to the proper position.
Position drive belt (1) on the air conditioner compressor pulley.
Install adjusting mechanism (3) for the air conditioner compressor.
Adjust the drive belt for the air conditioner compressor to the proper tension. Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace" for the correct procedure.


Parts nut Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.