NUT 0103028 - Caterpillar

Switch is normally open at deactuation. Upon installation, position the switch body so the arrow points in the direction of flow.Mass to actuate (close) switch (maximum) ... 4.0 g (.13 oz).Mass to deactuate (open) switch (minimum) ... 1.5 g (.05 oz). Mass must be applied at the shaft end, and must have at least 0.75 mm (.030 in) of travel remaining after the contacts change operating state.Supplemental Steering
9X1035
Switch is normally open at deactuation.Mass to actuate (close) switch (maximum) ... 4.0 g (.13 oz).Mass to deactuate (open) switch (minimum) ... 1.5 g (.05 oz). Mass must be applied at the screw head, and must have at least 0.75 mm (.030 in) of travel remaining after the contacts change operating state. Position the switch body so the arrow points in the direction of flow.