NUT 0802140 - Caterpillar

(1) Use 6V6640 Sealing Compound to seal face of vibrator casing and face of seal housing.(2) Torque for nut ... 195 N m (145 lb ft)(3) Torque for nut ... 95 N m (70 lb ft)(4) Torque for screws ... 47 N m (35 lb ft)(5) Torque for grease fitting ... 47 N m (35 lb ft)(6) Use Loctite 262 or equivalent on screw threads. Torque for screws ... 14 N m (10 lb ft)(7) Torque for nut ... 190 N m (140 lb ft)Vibrator Mechanism For CB-214B
(8) Torque for nut ... 190 N m (140 lb ft)(9) Torque for plug ... 81 N m (65 lb ft) Use only oils that meet the Engine Service Classification CD (MIL-L2104D) or (CD/TO-2).Oil capacity of vibrator ... 0.5 liter (.15 U.S. gallon)Vibrator Shaft And Eccentric Mass For CB-214B
(10) Eccentric mass(11) Shaft(12) Drive shaft To assemble eccentric mass (11), shaft (12) and drive shaft (13):1. Use 6V1541 Quick Cure Primer to degrease shaft and bore surfaces which are to be bonded.2. Use 9S3265 Retaining Compound to bond eccentric mass (11) to shaft (12) and drive shaft (13) to shaft (12).3. Eight hours are needed for curing at ambient temperature.