AVSPARE.COM
parts catalog

NUT 0878522 - Caterpillar



0878522 NUT Caterpillar parts NUT
Rating:
61
Alternative (cross code) number:
CA0878522
087-8522
0878522
Caterpillar 0878522 NUT

Buy NUT 0878522 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g03718436
Control Stations (1) Operator display (2) Compaction screen switchNote: The above illustration shows the tractor operator display. The tamper controls are similar on the screed operator displays.The operator controls for the tamper system are programmed in the software. Access to the controls is through operator display (1) located on the tractor control stations and screed control stations.The tamper settings entered in the operator display (1) are monitored by the screed ECM. The parameter data is monitored and communicated by the transmission ECM and the machine ECM to the screed ECM via CAN lines.Operator display (1) is a touch screen display and is operational when the machine key switch is in the ON position. From the default screen (shown), compaction screen switch (2) is pressed in order to access the tamper controls.Note: When an operator switches from one tractor control station to the other station, the tamper settings are maintained.
Illustration 2 g03718438
Operator Displays (3) Tamper switch (4) Tamper speed indicator (5) Tamper mode indicator (6) Settings switch (7) Compaction screen (8) Compaction settings screen (9) Tamper screen (10) Auto speed screen (11) Increase rate screen (12) OK buttonCompaction screen (7) provides current compaction information and access to settings. This screen contains information for the vibratory system, the screed assist system, and the tamper system. The compaction screen includes the following tamper-related features:
Tamper switch (3)
Tamper speed indicator (4)
Tamper mode indicator (5)
Compaction settings switch (6) Tamper switch (3) is a slider-type switch. This switch enables and disables the tamper system on the screed. A swiping motion is used to move the tamper switch icon left and right. The icon will change colors according to the position. The left position is the OFF position with the icon color gray. The right position is the ON position with the icon color green (shown). The default position is OFF.Note: Tamper switch (3) is only visible when a tamper is installed on the screed.Tamper speed indicator (4) shows the speed of the tamper system. The units displayed depends on the tamper mode. When in auto mode, the indicator reads tamper bar rate in tamps per distance (tamps per meter or tamps per foot). When in manual mode, the indicator reads tamper motor speed in rpm.Tamper mode indicator (5) indicates the mode of the tamper. The tamper mode is either auto or manual.


Parts nut Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.