NUT 0894003 - Caterpillar

Illustration 4 g06102022
(1) 471-7065 Eccentric Weight Housing Gp
Fill 471-7065 Eccentric Weight Housing Gp (1) with 0.3 L (0.32 qt) of 314-5169 Oil before installation.
Install new 471-7065 Eccentric Weight Housing Gp (splined shaft) (1).
Illustration 5 g06102026
Illustration 6 g06102027
Remove old harness assembly (G) and all hardware that secures harness assembly (G). Also remove two brackets (F). Discard all parts.
Illustration 7 g06102047
Remove older deflector assembly (H). Discard the part.
Illustration 8 g06102028
(2) 475-8886 Deflectors
(3) 470-6460 Bracket As
Install new 475-8886 Deflectors (2) using four M16 bolts and two M10 bolts.
Install two new 470-6460 Bracket As (3) using four M10 bolts.
Illustration 9 g06102033
(3) 470-6460 Bracket As
(4) 473-9115 Wiring Harness
(5) 475-0301 Screed Harness As
Illustration 10 g06102035
(3) 470-6460 Bracket As
(4) 473-9115 Wiring Harness
Install new 473-9115 Wiring Harness (4) and 475-0301 Screed Harness As (5) through brackets (3). Secure harness assemblies using hardware supplied with screed installation kit.Refer to Illustration 9 and Illustration 10 for proper harness routing and orientation.
Illustration 11 g06102038
(6) 474-3127 Platform Cover As
(7) 7X-7877 Edge Strip
Install 7X-7877 Edge Strip (7) to new 474-3127 Platform Cover As (6).
Illustration 12 g06102039
(3) 470-6460 Bracket As
(6) 474-3127 Platform Cover As
(8) Bolts
(9) Washers
(10) 491-0717 Cover
(11) Bolts
(12) Washers
Secure new 474-3127 Platform Cover As (6) on brackets (3) using four bolts (8) and four washers (9).
Install new 491-0717 Cover (10) with four bolts (11) and four washers (12).
Illustration 13 g06102050
Replace BOE connecting shaft with a new splined shaft (13).
Illustration 14 g06102051
Replace BOE connecting harness with new connecting harness assembly (14).