1007689 NUT AS Caterpillar parts
311B, 312, 312C L, 315, 315C, 317, 318B, 318C, 320B, 320B FM LL, 320C, 320C FM, 320C L, 322B L, 322C, 322C FM, 325, 325 LN, 325B, 325B L, 325C, 325C FM, 330, 330B L, 330C FM, 330C L, 330C MH, 345B, 34...
Rating:
Alternative (cross code) number:
CA1007689
100-7689
1007689
CA1007689
100-7689
1007689
Weight: 0.01 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 1007689:
Information:
Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8T-5255     Hydraulic Jack     1    
B     180-3032     Stand     1    
C     132-8223     Power Pack     1    
1U-6221 Hydraulic Torque Wrench Assembly     1    
1U-6222 46mm Hex Link     1    
D     183-4799     Track Roller Lifting Fork     1    Note: The procedure to install any of the track carrier rollers is identical. The procedure that follows is for one of the track carrier rollers.
Make sure that the shaft of the track carrier roller and the bore in the mounting bracket are clean and free of dirt.
Illustration 1 g00597229
Use Tooling (D) and a suitable lifting device in order to lift track carrier roller (2). The weight of track carrier roller (2) is approximately 57 kg (125 lb). Carefully position track carrier roller (2) to the mounting bracket.Note: Be sure that track carrier roller (2) is centered between the track links.
Illustration 2 g00597213
Illustration 3 g00597221
Use Tooling (C) in order to tighten bolt (1) to a torque of 1000 125 N m (740 90 lb ft).
Illustration 4 g00597205
Use Tooling (A) in order to lift the track assembly. Remove Tooling (B). Lower the track assembly onto the track carrier roller. Remove Tooling (A) .
Illustration 5 g00595011
Personal injury or death can result from grease and oil coming out of the relief valve.Grease and oil are under high pressure coming out of the relief valve and can penetrate the body.Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened. Make sure the vent holes are clean before the tension is released on the track.
Tighten relief valve (1) for the track adjuster. Adjust the tension of the track assembly. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust".
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8T-5255     Hydraulic Jack     1    
B     180-3032     Stand     1    
C     132-8223     Power Pack     1    
1U-6221 Hydraulic Torque Wrench Assembly     1    
1U-6222 46mm Hex Link     1    
D     183-4799     Track Roller Lifting Fork     1    Note: The procedure to install any of the track carrier rollers is identical. The procedure that follows is for one of the track carrier rollers.
Make sure that the shaft of the track carrier roller and the bore in the mounting bracket are clean and free of dirt.
Illustration 1 g00597229
Use Tooling (D) and a suitable lifting device in order to lift track carrier roller (2). The weight of track carrier roller (2) is approximately 57 kg (125 lb). Carefully position track carrier roller (2) to the mounting bracket.Note: Be sure that track carrier roller (2) is centered between the track links.
Illustration 2 g00597213
Illustration 3 g00597221
Use Tooling (C) in order to tighten bolt (1) to a torque of 1000 125 N m (740 90 lb ft).
Illustration 4 g00597205
Use Tooling (A) in order to lift the track assembly. Remove Tooling (B). Lower the track assembly onto the track carrier roller. Remove Tooling (A) .
Illustration 5 g00595011
Personal injury or death can result from grease and oil coming out of the relief valve.Grease and oil are under high pressure coming out of the relief valve and can penetrate the body.Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened. Make sure the vent holes are clean before the tension is released on the track.
Tighten relief valve (1) for the track adjuster. Adjust the tension of the track assembly. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust".
Cat SIS web machinery list:
Parts nut Caterpillar catalog:
9W4381
NUT-TRACK
325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L, 330C MH, 330D, 330D L, 345B, 345B L, 345C, 345C L, 345D, 349D L, 350, 350 L, 521B, 527, 963B, 963C, 963D, D6H XL, D6R, D6R II, D6R III, D6R STD,...
325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L, 330C MH, 330D, 330D L, 345B, 345B L, 345C, 345C L, 345D, 349D L, 350, 350 L, 521B, 527, 963B, 963C, 963D, D6H XL, D6R, D6R II, D6R III, D6R STD,...
7X0451
NUT-FULL
5110B, 515, 525, 550, 550B, 560B, 561H, 561M, 561N, 570, 570B, 580, 580B, 583R, 615C, 623G, 623H, 623K, 623K LRC, 631E, 631G, 633E, 637E, 637G, 651E, 657E, 657G, 931C, 931C II, 933, 933C, 939, 939C, 9...
5110B, 515, 525, 550, 550B, 560B, 561H, 561M, 561N, 570, 570B, 580, 580B, 583R, 615C, 623G, 623H, 623K, 623K LRC, 631E, 631G, 633E, 637E, 637G, 651E, 657E, 657G, 931C, 931C II, 933, 933C, 939, 939C, 9...
7I7732
NUT-SPECIAL
322, 322 FM L, 322B, 322B L, 322B LN, 322C, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, OEMS, PL61
322, 322 FM L, 322B, 322B L, 322B LN, 322C, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, OEMS, PL61
6Y7433
NUT-TRACK
365B, 375, 375 L, 5080
365B, 375, 375 L, 5080
5P8221
NUT-TRACK
5110B, D10, D10N, D10R, D10T, D10T2
5110B, D10, D10N, D10R, D10T, D10T2
1740222
NUT-TRACK
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
7Y1460
NUT
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325 L, 325B L, 325C, 325C FM, 325C L, 325D FM, 325D FM LL, 325D L, 325D MH, 329D L, 330, 330 F...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325 L, 325B L, 325C, 325C FM, 325C L, 325D FM, 325D FM LL, 325D L, 325D MH, 329D L, 330, 330 F...
1504742
NUT-TRACK
325D FM, 325D FM LL, 330B L, 330C, 330C FM, 330C L, 330D FM, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG,...
325D FM, 325D FM LL, 330B L, 330C, 330C FM, 330C L, 330D FM, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG,...
8C7328
NUT
320 L, 320B, 320B FM LL, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C FM, 323D LN, 323D SA, 324D FM, 324D FM LL, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 329D, 329D L, 329D LN, ...
320 L, 320B, 320B FM LL, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C FM, 323D LN, 323D SA, 324D FM, 324D FM LL, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 329D, 329D L, 329D LN, ...
1793038
NUT
325C, 328D LCR, 330C, 330C L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L
325C, 328D LCR, 330C, 330C L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L
1440806
NUT-TRACK
345B II, 345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C
345B II, 345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C
7Y1198
NUT AS
350, 375, 375 L
350, 375, 375 L
6C9192
NUT
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 322B LN, 325 L, 325B L, 330B L, 345B II, 345B L, 350, 350 L, 375, 5080
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 322B LN, 325 L, 325B L, 330B L, 345B II, 345B L, 350, 350 L, 375, 5080
6C9238
NUT
307B, 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 322B LN, 325 L, 325B L, 330B L, 345B II, 345B L, 350, 365B, 365B II, 375, 375 L, 385B, 5080, 5090B
307B, 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 322B LN, 325 L, 325B L, 330B L, 345B II, 345B L, 350, 365B, 365B II, 375, 375 L, 385B, 5080, 5090B
0937676
NUT
307, 307B, 307C, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312C L, 312D, 312D L, 312E, 313B, 314C, 314D LCR, 314E CR, E110, E110B, E120, E120B, E140, E180, E240, E70, E70B, M312, M315
307, 307B, 307C, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312C L, 312D, 312D L, 312E, 313B, 314C, 314D LCR, 314E CR, E110, E110B, E120, E120B, E140, E180, E240, E70, E70B, M312, M315
7I8100
NUT
311, 311B, 311C, 312, 312B, 312B L, 312C, 312C L, 312D, 313B, 314C, 315, 315B, 315B L, 315C, 315D L, 317, 317B LN, 318B, 319D, 319D LN
311, 311B, 311C, 312, 312B, 312B L, 312C, 312C L, 312D, 313B, 314C, 315, 315B, 315B L, 315C, 315D L, 317, 317B LN, 318B, 319D, 319D LN
0951209
NUT
1390, 2590, 301.5, 302.5, 303, 303.5, 304, 304.5, 305.5, 306, 311, 311B, 312, 312B, 312B L, 315, 315B, 315B L, 317, 317B LN, 318B, 320C, 320D L, 330, 330 FM L, 330 L, 541, 541 2, 551, 552, 552 2, 950G...
1390, 2590, 301.5, 302.5, 303, 303.5, 304, 304.5, 305.5, 306, 311, 311B, 312, 312B, 312B L, 315, 315B, 315B L, 317, 317B LN, 318B, 320C, 320D L, 330, 330 FM L, 330 L, 541, 541 2, 551, 552, 552 2, 950G...
0964874
NUT
307, 311, 312, 312C L, 320 L, 325, 325 L, 325 LN, 330, 350, 375, 375 L, E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300B, E650, E70, E70B, EL240B
307, 311, 312, 312C L, 320 L, 325, 325 L, 325 LN, 330, 350, 375, 375 L, E110, E110B, E120, E120B, E140, E180, E200B, E240, E240C, E300B, E650, E70, E70B, EL240B
1123295
NUT
307, 312, 315, 317, 325 L, 330, 330 L, 350 L
307, 312, 315, 317, 325 L, 330, 330 L, 350 L
6C9197
NUT
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 320B, 322 FM L, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B L, 350, 350 L, 375, 375 L, 5080
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 320B, 322 FM L, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B L, 350, 350 L, 375, 375 L, 5080
6C9097
NUT
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 322 FM L, 322B L, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B, 345B II, 345B II MH, 345B L, 350, 350 L, 365B, 365B II, 375, 375 L, 385B, ...
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 322 FM L, 322B L, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B, 345B II, 345B II MH, 345B L, 350, 350 L, 365B, 365B II, 375, 375 L, 385B, ...
6C9048
NUT
307, 307B, 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 322B LN, 325 L, 325B L, 330 L, 330B L, 345B II, 345B L, 350, 350 L, 365B, 365B II, 375, 385B, 5080, 5090B, 564, 572R II, 574B, AP-6...
307, 307B, 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 322B LN, 325 L, 325B L, 330 L, 330B L, 345B II, 345B L, 350, 350 L, 365B, 365B II, 375, 385B, 5080, 5090B, 564, 572R II, 574B, AP-6...
4I5049
NUT-SPACER
307, 307B, 307C, 307D, 308D, 308E2 CR, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C L, 312D, 312D L, 312D2, 312E, 312E L, 314D CR, 314D LCR, 314E CR, 314E LCR, 315, 315B L, 315C, 315D L, 31...
307, 307B, 307C, 307D, 308D, 308E2 CR, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C L, 312D, 312D L, 312D2, 312E, 312E L, 314D CR, 314D LCR, 314E CR, 314E LCR, 315, 315B L, 315C, 315D L, 31...
1103690
NUT
311B, 312, 315, 317, 320B, 322B LN, 325 L, 325B L, 330 L, 330B L, 345B II, 345B L, 350, 365B, 365B II, 375, 385B, 5080, 5090B
311B, 312, 315, 317, 320B, 322B LN, 325 L, 325B L, 330 L, 330B L, 345B II, 345B L, 350, 365B, 365B II, 375, 385B, 5080, 5090B