NUT-SPECIAL 1310447 - Caterpillar

Removal Procedure
Contact with high pressure fuel may cause personal injury or death. Wait 60 seconds after the engine has stopped to allow fuel pressure to purge before any service or repair is performed on the engine fuel lines.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01366494
Remove tube assembly (1) from exhaust combustion manifold (2) .
Remove bolt (3) .
Illustration 2 g01366493
Remove all tube assemblies (4) .
Remove bolt (5) and remove fuel manifold (2) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Fuel injection lines MUST only be used once. Discard all fuel injection lines after use.
Illustration 3 g01366493
Position exhaust combustion manifold (2) and install bolt (5) .
Install tube assemblies (4) .
Illustration 4 g01366494
Install bolt (3) into exhaust combustion manifold (2) .
Install tube assembly (1) .