NUT 1608503 - Caterpillar

Illustration 1 g02599037
Top view of engine
Illustration 2 g02599038
Front view of engine
Table 1
Specification for 262-7577 Air Inlet and Exhaust Lines
Item Qty Part Specification Description
1 4 197-9732 U-Bolt Torque to 15 2 N m (133 18 lb in).
2 16 216-2211 Clamp Use the following procedure in order to tighten the clamp:
1. Center the clamp within the marking on the hose.
2. Orient the clamp so that the T-bolts are separated by 90 degrees.
3. Torque to 10 2 N m (89 18 lb in).
3 8 6V-3917 O-Ring Seal Before assembly, lubricate the bore with glycerin or an approved equivalent.
4 2 3J-1907 O-Ring Seal Before assembly, lubricate the bore with glycerin or an approved equivalent.
5 8 6V-1943 High Temperature Bolt Before assembly, apply Loctite C5A copper anti-seize to the threads and to the bearing surface.
Torque to 55 10 N m (41 7 lb ft).