NUT-BEARING 1774658 - Caterpillar

There are three levels of password protection associated with the EMCP 3 control. All of the adjustable parameters are associated with a specific level of security. A specific level of security is required to change each parameter.The passwords only affect changing parameters from the EMCP 3 control. Changing parameters with Cat ET Service Tool does not require passwords.The level of password protection that is required for each set point is identified on the parameter set point entry screen. A security level identification number "1", "2", or "3" next to a padlock symbol is displayed on the parameter set point entry screen. Level 3 security is used for the most secure set points and level 1 security is used for the least secure set points.If the EMCP 3 is currently at the required level of security when viewing a parameter, then the padlock will not appear.If a parameter is displayed with a padlock, but there is no security level identification number associated with the parameter, then the parameter cannot be changed from the EMCP 3 display.Level 1 and level 2 passwords are disabled when shipped from the factory. If desired, level 1 and level 2 passwords can be user-defined.Function and Navigation Keys
ReferenceThe call outs in this section are related to the EMCP 3 control system panel illustration in the Systems Operation, RENR7902, "Electronic Control Module (Generator Set)" section.The keys that are listed below are used for programming the EMCP 3 and for navigating within the menu structure.ReferenceRefer to Systems Operation, "Electronic Control Module (Generator Set)" section for an explanation of the function keys and the navigation keys. The function keys include the enter and escape keys. The navigation keys include the scroll left, scroll right, scroll up, and scroll down) keys.Escape (9) - Used to navigate up (backward) through the menu structure and to back out of data entry screens during set point programming.Enter key (10) - Select a highlighted menu item or save a programmed value.Scroll Right key (11) - During numeric data entry, choose the digit to edit. During certain set point adjustments, select or deselect a check box.Scroll Down key (12) - Move down through the main menu or navigate within a list in order to highlight one of the items. Also used to decrement digits (0-9).Scroll Up key (13) - Move up through the main menu or navigate within a list in order to highlight one of the items. Also used to increment digits (0-9).Scroll Left key (14) - During numeric data entry, choose the digit to edit. During certain set point adjustments, select or deselect a check box.Drop to Minimum Security Level
The first option on the security screen is "DROP TO MIN LEVEL". This option refers to a process of placing the EMCP 3 into the lowest level of security that is authorized. The lowest level of security would be used after the programming of the control is complete. If "DROP TO MIN LEVEL" is not initiated manually, then the control will automatically revert