NUT-CYLINDER HEAD 1W2361 - Caterpillar

Illustration 1 g00771922
External Payload Display - The external payload display is a 356 mm × 686 mm (14 inch × 27 inch) screen. The external payload display is mounted on the side of the truck. The external payload display provides the operator of the loading tool with the measured weight of the material that is currently in the body of the truck. The payload information is displayed in 254 mm (10 inch) red digital numbers. There are three configurations of the external payload display that are available. These configurations are listed below:
Dual Displays (right hand and left hand displays)
Right Display (right hand display)
Left Display (left hand display)The external payload display receives data through the VIMS broadcast (system telemetry) port. There are two modes of operation. The modes of operation are listed below:Single Mode - This mode is for machines that are not equipped with a radio telemetry system.Passive Mode - This mode is for machines that are equipped with a radio telemetry system. This mode allows the display to access data for the payload weight without interfering with the operation of the radio telemetry system.Transmission Control Module - The transmission control module converts the following conditions into a digital equivalent value: body position, ground speed, transmission gear and parking brake. The transmission control module then passes the information to the VIMS main module over the CAT data link for use by the VIMS payload system. Engine Control Module - The engine control module calculates fuel flow. The control converts this data into a digital equivalent value. The engine control module then passes the information to the VIMS main module over the CAT data link for use by the VIMS payload system.