NUT-ADJUSTING 2952342 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00636505
Remove two bolts (2) from oil supply line (3) of the turbocharger (1) .
Remove two bolts (4) from oil return line (5) of the turbocharger (1) .
Illustration 2 g00636533
Typical example
Remove bolt (6) and two clamps that hold oil supply line (3) and oil return line (5) to the cylinder block.
Remove hose clamp (7) from the oil return line (5). Remove flare nut (8) from oil supply line (3) .
Illustration 3 g00636534
Remove hose clamp (9) .
Remove four nuts (10) .
Remove turbocharger (1) and the gasket.
Plug all openings immediately.