2P3261 NUT-HEX WASHER Caterpillar parts
120, 12F, 12G, 130G, 140, 140G, 14E, 14G, 16G, 225, 235, 3304, 3306, 3306B, 3406, 518, 572G, 621B, 627B, 814, 814B, 815, 815B, 816, 816B, 824C, 826C, 920, 936F, 941, 950, 950B, 950F, 951B, 955K, 955L,...
Rating:
Alternative (cross code) number:
CA2P3261
2P-3261
2P3261
CA2P3261
2P-3261
2P3261
Weight: 0.02 pounds 0 kg.
Information:
COATING/PLATING
Zinc-Dichromate Coating
FLANGE DIAMETER
17.17
mm
MATERIAL
Steel - Carbon - 140 MPa Min Yield Strength
OVERALL HEIGHT
9.25
mm
THREAD SIZE
.38-16
WRENCH SIZE
14.29
WRENCH STYLE
HEX
EXCAVATOR, WHEEL TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$12.27
20 Jan 2022
US: Florida-Parts-Z
2P3205 - Bolt-HEX 2P3261 5S9904 1P1370 fits Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
Number on catalog scheme:
4
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the front housing cover. Refer to Disassembly and Assembly, "Front Housing Cover - Remove".
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: The oil pan plate has been removed for photo purposes only.
Illustration 1 g00590442
Remove plates (2) that hold the balancer shaft in the cylinder block.
Remove balancer shafts (1) from the cylinder block.Installation Procedure
Illustration 2 g00590449
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Install the balancer shafts in each side of the cylinder block.
Install plates (2) and the bolts that hold the balancer shafts in position in the cylinder block.Note: Ensure that the balancer shafts are in time before the oil pump is installed.End By:
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Install the front housing cover. Refer to Disassembly and Assembly, "Front Housing Cover - Install".
Start By:
Remove the front housing cover. Refer to Disassembly and Assembly, "Front Housing Cover - Remove".
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: The oil pan plate has been removed for photo purposes only.
Illustration 1 g00590442
Remove plates (2) that hold the balancer shaft in the cylinder block.
Remove balancer shafts (1) from the cylinder block.Installation Procedure
Illustration 2 g00590449
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Install the balancer shafts in each side of the cylinder block.
Install plates (2) and the bolts that hold the balancer shafts in position in the cylinder block.Note: Ensure that the balancer shafts are in time before the oil pump is installed.End By:
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Install the front housing cover. Refer to Disassembly and Assembly, "Front Housing Cover - Install".
Caterpillar parts catalog:
Parts nut Caterpillar catalog:
215, 3204, 3606, 3608, 3612, 3616, 3618, 426, 428, 65, 943, 953, 963, C280-12, C280-16, C280-6, C280-8, CP-433C, CS-431C, D4HTSK II, G3606, G3606B, G3608, G3612, G3616, IT28, IT28B
206, 212, 214, 3054, 322 FM L, 325 L, 330, 3406B, 3406C, 3606, 3608, 3612, 3616, 416, 426, 428, 539, 631E, 631G, 633D, 633E II, 637D, 637E, 637G, 651E, 657E, 769D, 770, 771D, 772, 773D, 773E, 773F, 77...
120M, 12M, 225, 2290, 235, 2390, 2391, 2491, 30/30, 304, 305, 305.5, 306, 307E, 308E, 308E CR, 308E SR, 308E2 CR, 315B L, 3176C, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3412, 3412C, 3412E, 3456...
0686379
NUT
428
428
120, 120B, 120G, 127, 129, 12E, 12G, 130G, 140, 140B, 14E, 14G, 16, 163, 1676, 16G, 172, 173B, 183B, 206, 212, 215, 24, 25, 3054, 3054B, 3208, 3304, 3S, 41, 428, 44, 46, 4S, 50, 518, 561B, 561C, 561D,...
0676205
NUT
212, 426, 428, 436, AP-800, C4.4, C4.4XQ100, C4.4XQ80, CB-424, CS-431B, RT50
212, 426, 428, 436, AP-800, C4.4, C4.4XQ100, C4.4XQ80, CB-424, CS-431B, RT50
14G, 245, 3181, 3192, 3208, 3306, 3406, 3406B, 3408, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 561B, 561C, 571G, 572G, 583H, 583K, 594, 594H, 615, 621, 65, 7241, 7251, 7261, 7271, 76...
1673C, 206, 212, 214, 224, 3208, 3306, 3306C, 3516, 416, 426, 428, 613C, 65, 834B, 916, 926, 926A, 931B, 931C, 931C II, 935B, 936, 936F, 943, 950B, 953, 963, 963B, 973, AD30, AD45B, AD55, AD55B, AD60,...
0334720
NUT
426, D6H
426, D6H
214B, 245, 3116, 320 L, 3304, 426, 428, 918F, 924F, 980C, CB-534, E200B, E240C, PS-500
0329191
NUT
416, 426
416, 426
214B, 3114, 3116, 3126, 3126B, 320 L, 325, 325 L, 416, AP-1000B, AP-1055B, AP-800C, AP-900B, BG-225B, BG-2455C, BG-245C, CB-434, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544, CB-545, CB-634, CB...