NUT-RING 3853611 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-0960 Molybdenum Grease - Start By:
Connect the steering frame lock.
Illustration 1 g00649006
Use a suitable lifting device to support link assembly (1).
Illustration 2 g02875919
Remove bolt (2). Remove pin assembly (3). Disconnect link assembly (1) from lever assembly (4).
Illustration 3 g00649048
Use a suitable lifting device to support link assembly (1).
Remove bolt (5). Remove pin assembly (6). Remove link assembly (1) from the bucket.
Illustration 4 g00649052
Remove lip seal (7). Repeat for the opposite side of the bore.
Illustration 5 g00649057
Remove sleeve bearing (8) from the link assembly.
Repeat Steps 5 and 6 for the opposite end of the link assembly. Installation Procedure
Illustration 6 g00649057
Install sleeve bearing (8) into the link assembly.
Illustration 7 g00649052
Install lip seal (7). Repeat for the opposite side of the bore.
Repeat Steps 1 and 2 for the opposite end of the link assembly.
Apply Tooling (A) to the pin bores and lip seals.
Illustration 8 g00649048
Use a suitable lifting device in order to position link assembly (1).
Install pin assembly (6) and bolt (5).
Illustration 9 g00649006
Use a suitable lifting device in order to align the bore of link assembly (1) with the bores of lever assembly (4).
Illustration 10 g02875919
Install pin assembly (3) and bolt (2) into lever assembly (4). End By:
Separate the steering frame lock.