3B6683 NUT Caterpillar parts
941
Rating:
Alternative (cross code) number:
CA3B6683
3B-6683
3B6683
CA3B6683
3B-6683
3B6683
TRACK LOADER,
Compatible equipment models: 3B6683:
Information:
The Electronic Control Module (ECM) has been powered for at least two seconds.The ECM reads signal voltage that is below 0.2 VDC for eight seconds.System Response:The ECM will log the diagnostic code. The diagnostic code may be viewed on a display module or on the Caterpillar Electronic Technician (ET). The ECM flags engine oil temperature as invalid data. The ECM sets the engine oil temperature to the same value as the coolant temperature. If the coolant temperature sensor has failed, one of the following values is used:
If the engine is running, the engine oil temperature is set to 65 °C (149 °F).
If the engine is not running, the engine oil temperature is set to −10 °C (14 °F).Possible Performance Effect:
NoneTroubleshooting:Test Step 1. Perform the following diagnostic procedure: "Engine Temperature Sensor Open or Short Circuit - Test"Results:
OK - STOP
If the engine is running, the engine oil temperature is set to 65 °C (149 °F).
If the engine is not running, the engine oil temperature is set to −10 °C (14 °F).Possible Performance Effect:
NoneTroubleshooting:Test Step 1. Perform the following diagnostic procedure: "Engine Temperature Sensor Open or Short Circuit - Test"Results:
OK - STOP
Caterpillar parts catalog:
Parts nut Caterpillar catalog:
5B0637
NUT
650B, 666, 9A
650B, 666, 9A
4F3894
NUT
127, 25, 619
127, 25, 619
4F7484
NUT
127, 619
127, 619
1P4719
NUT
D5
D5
5M5017
NUT
571G, 572G, 583H, 583K, 983, 983B, D7F, D7G, D7G2, D8H, D8K, D9E
571G, 572G, 583H, 583K, 983, 983B, D7F, D7G, D7G2, D8H, D8K, D9E
1P0933
NUT
983
983
6J0612
NUT
983
983
1J8929
NUT
983
983
9H5402
NUT
571G, 572G, 983, 983B, D7F, D7G
571G, 572G, 983, 983B, D7F, D7G
2F2978
NUT
637D, D5
637D, D5
6B6652
NUT
D5
D5
8K9612
NUT
951B
951B