NUT 7I2756 - Caterpillar

Table 1
New Software Part Numbers     Former Software Part Numbers     Applications    
465-3355     436-7214
462-2740     793F Low Altitude    
465-3354     397-6108
457-6797
462-2738     795F Low Altitude    
462-2739     457-9216
436-7213     797F Low Altitude    
462-2745     378-0291     793F Lesser Regulated Countries (LRC)    
462-2744     -     795F Lesser Regulated Countries (LRC)    
462-2743     452-4131     797F Lesser Regulated Countries (LRC)    
462-2741     437-7870     793F High Altitude    
478-5062     462-2742     797F High Altitude    Note: For 795F Off-Highway Truck Engines flashed with any engine software other than 457-6797 Engine Ratings Electronic Software Gp or 462-2738 Engine Software, the engines must be relabeled when updating to the 465-3354 Engine Ratings Electronic Software Gp. Refer to the procedure below to request new emissions labels for your engine.Note: The 462-2738 Engine Software and the 462-2740 Engine Software were canceled and replaced due to a false 2247-3 diagnostic code error. The 462-2742 Engine Software was canceled and replaced due to a fan calibration issue found in the software.Emission Label Request Procedure
Begin at the SIS web homepage. The address is:https://sis.cat.com
Illustration 1 g03635456
Select the Engine Technical Marketing Information - TMI link.
Once in TMI, input the serial number of the engine into the "Reference Number" box and select "Serial Number" in the drop-down menu.
Press the "Retrieve Data" button.
Select the "Emissions Data" link.
Scroll to the bottom and click on the "Need emissions replacement label-Click Here!" link.
Illustration 2 g03632198
Click on the "Emissions/Certification Replacement" link.
Illustration 3 g03632218
Complete dealer name and address information.
Illustration 4 g03632339
Illustration 5 g03632397
Note: Be sure that the correct shipping information is provided. International requests must have a valid UPS® or DHL® account number.
Complete the remaining fields highlighted with a red asterisk.
Select "Both Certification and Information Label" as the label type. Enter the number of this Priority Program in the field titled "Reason for the replacement label request?".Note: The number for the Priority Program is the Service Magazine media number.It is also important to have the engine serial number field completed with the correct information.
When the new labels arrive, remove the original adhesive label, clean the engine surface, and replace original label with the new label and clear overlay.
Remove the original stamped metal plate from the side of the engine block and replace original plate with the new plate using Loc-Tite® Brand Depend adhesive.
Return the original metal plate to the following address:Caterpillar, Inc
Global Engine Marking
PO Box 600 MOS11
Rt 29 & Old Galena Rd.
Mossville, IL 61552 USA
If there are any questions regarding the adhesive label or the metal plate, contact Global_Engine_Marking@Cat.com.