AVSPARE.COM
parts catalog

NUT IM6120 - Caterpillar



IM6120 NUT Caterpillar parts 966G NUT
Rating:
48
Alternative (cross code) number:
CAIM6120
IM-6120
IM6120
Caterpillar IM6120 NUT

Buy NUT IM6120 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: IM6120:

WHEEL LOADER  966G   Caterpillar
Number on catalog scheme: None
 
  For full view, you need register

Information:

Removal Procedure
Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03345722
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (12) and remove the assembly of cover (13), spring (14) and diaphragm (15). Note the orientation of cover (13).
Remove spring (14) and diaphragm (15) from cover (13).
If necessary, follow Step 3.a through Step 3.b in order to remove the gauze for the breather.
Remove screws (18) and carefully remove baffle plate (19).
Remove gauze (16) from valve mechanism cover (17). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 247-5377 Torque Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Make sure that the components of the breather assembly are installed correctly. Engine damage may occur if the breather assembly is not working properly.
Illustration 2 g03345730
Clean all parts and inspect all parts. Replace any parts that are worn or damaged. Ensure that the cavity for the breather in the valve mechanism cover is clean. Ensure that the vent hole in Position (X) and the vent hole in cover (13) are free from restriction.
If necessary, follow Step 2.a through Step 2.c in order to install the gauze for the breather.
Install gauze (16) to valve mechanism cover (17).
Position baffle plate (19) on valve mechanism cover (17) and install screws (18).
Tighten screws (18) to a torque of 1.5 N m (13 lb in).
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install diaphragm (15) and spring (14) to cover (17).
Position the assembly of cover (13), spring (14) and diaphragm (15) onto valve mechanism cover (17). Note: Ensure the correct orientation of the cover.
Install bolts (12). Use Tooling (A) in order to tighten bolts to a torque of 3 N m (27 lb in).

Caterpillar parts catalog:

Caterpillar parts catalog
966G WHEEL LOADER 8XW00347-UP (MACHINE) POWERED BY 3306 ENGINE
972G WHEEL LOADER 9GW00293-UP (MACHINE) POWERED BY 3306 ENGINE
966G WHEEL LOADER /COMMAND CONTROL STEE/ AAH00355-UP (MACHINE)
972G WHEEL LOADER /COMMAND CONTROL STEE/ AAW00197-UP (MACHINE)


Parts nut Caterpillar catalog:

7X0851 NUT
120M, 120M 2, 12M, 12M 2, 12M 3, 140M, 140M 2, 140M 3, 14M, 160M, 160M 2, 160M 3, 16H, 16H NA, 16M, 24H, 24M, 315B, 315C, 315D L, 316E L, 318D L, 318D2 L, 320B, 320C, 320D, 320D GC, 320D L, 320D LRR, ...
6V9169 NUT
10 FT, 10-20B, 1090, 10B, 115, 1190, 1190T, 120M, 120M 2, 1290T, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14H NA, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16G, 16H, 16M, 216, 228,...
7X3374 NUT-FULL
120G, 12G, 130G, 140G, 14G, 160G, 16G, 2470C, 2570C, 2670C, 2864C, 3054B, 3126B, 3176C, 3196, 3208, 322 FM L, 325 L, 330, 330 FM L, 330 L, 3306, 330B, 330B L, 3406, 3406B, 3406C, 3408, 350, 414E, 416B...
6V8183 NUT-FULL
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H ...
6V9168 NUT
10 FT, 10-20B, 10B, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M,...
2J7686 NUT
215, 215B, 215C, 215D, 225, 225D, 227, 229, 229D, 2384C, 245, 245B, 2484C, 559C, 579C, 623F, 623G, 8B, 8D, 950H, 962H, 963, 963B, 963C, 963D, 966D, 966F, 966F II, 966G, 966G II, 966H, 966K, 966M, 966M...
4J6888 NUT
10, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 365B, 365B II, 365C, 385C, 385C FS, 5080, 5090B, 5230, 539, 623F, 844, 844H, 844K, 854G, 8A, 8S, 8U, 966D, 966F, 966F II, 966G, 9...
3J9449 NUT
225, 630B, 631B, 631D, 631E, 631G, 637E, 637G, 641B, 651, 657, 795F AC, 795F XQ, 797, 797B, 797F, 950G, 950G II, 950H, 962G, 962G II, 966D, 966F, 966F II, 966G, 966G II, 970F, 972G, 972G II, 983B, 988...
4E2240 NUT-BEARING
545, 545C, 545D, 555D, 814F, 814F II, 815F, 815F II, 816F, 816F II, 966F, 966F II, 966G, 966G II, 966H, 966K, 966M, 966M XE, 970F, 972G, 972G II, 972H, 972K, 972M, 972M XE, IT38G II
3B9393 NUT
12E, 950, 966C, D7F
3E6917 NUT
950H, 966G II, 966H
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.