O-RING 0861126 - Caterpillar

0861126 O-RING Caterpillar parts E110, E120, E140

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA0861126
086-1126
0861126

Weight: 0.60 pounds 0 kg.

Buy O-RING 0861126 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 0861126:

EXCAVATOR E110 E120 E140 Caterpillar

Number on catalog scheme: 21

For full view, you need register

Information:

Sure Seal Connectors
Illustration 1. Sure Seal Connectors (Contact 1 Positive). (1) Machine harness connector. (2) 105-8827 Arc Suppressor. (3) A/C clutch coil connector.
Illustration 2. Sure Seal Connectors (Contact 2 Positive). (1) Machine harness connector. (3) A/C clutch coil connector. (4) 3E-9169 Arc Suppressor. 1. Determine the polarity of the connector (which contact is powered, and which is grounded). Refer to the machine schematic, or check for the presence of +24V with a 6V-7070 Multimeter or equivalent. Most machines have +24V on contact 1, and ground on contact 2.2. If contact 1 is the +24V contact: Install a 105-8827 Arc Suppressor (2) between the machine harness connector (1) and the compressor coil connector (3). See Illustration 1.3. If contact 2 is the +24V contact: Install a 3E-9169 Arc Suppressor (4) between the machine harness connector (1) and the compressor coil connector (3). See Illustration 2.DT Connectors
Illustration 3. DT Connectors. (1) Machine harness connector. (3) A/C clutch coil connector. (5) 106-8704 Arc Suppressor. (6) 114-2859 Harness.1. Determine the polarity of the connector (which contact is powered, and which is grounded). Refer to the machine schematic, or check for the presence of +24V with a 6V-7070 Multimeter or equivalent. Most machines have +24V on contact 1, and ground on contact 2.2. If contact 1 is the +24V contact: Connect a 106-8704 Arc Suppressor (5) to one of the DT plugs on a 114-2859 Harness (6). Connect the other two DT connectors on Harness (6) between the machine harness connector (1) and the compressor coil connector (3). See Illustration 3.3. If contact 2 is the +24V contact: Modify a 114-2859 Harness (6), by removing both contacts from any one of the DT connectors, and installing them in the opposite positions in the connector. Then connect Harness (6) and the Arc Suppressor as described in Step 2 above.Coil any excess harness length, and secure with plastic ties as required.
Some production machines are equipped with these arc suppressors. The arc suppressors will be added to other machines at a later time.

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

E140 HYDRAULIC EXCAVATOR 1NF00001-09040 (MACHINE) POWERED BY 6D14 ENGINE

P.T.O. VALVE » c903715

E120 HYDRAULIC EXCAVATOR 1LF00001-UP (MACHINE) POWERED BY 6D14 ENGINE

P.T.O. VALVE » c919725

E110 HYDRAULIC EXCAVATOR 3FG00001-UP (MACHINE) POWERED BY 4D31-T ENGINE

P.T.O. VALVE » c920510

E140 TRACK-TYPE EXCAVATOR 1NF09041-UP (MACHINE) POWERED BY 6D14 ENGINE

P.T.O. VALVE » c941846

Parts o Caterpillar catalog:

6V7609 O-RING
311, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, E110, E110B, E120, E120B, E140, E200B, E240...

0966279 O-RING
311, E110B, E140, E180, E240, E240C, E300, E300B, EL240B

0951599 O-RING
311, 320C FM, 321C, 321D LCR, 322C FM, 323D L, 325C, 325C FM, 325D, 325D L, 328D LCR, 329D L, 330C, 330C FM, 330D L, 336D L, 345C, 345D, 345D L, 345D L VG, 349D, 349D L, 365B, 365B II, 365B L, 365C, 3...