O-RING 0951599 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 238-9586 Engine Turning Tool 1
C 1U-9200 Lever Puller Hoist 1
D 189-0411 Shackle As 2
E 6V-6146 Load Leveling Beam 1
Illustration 1 g01291246
Attach Tooling (D) onto engine (24). Attach Tooling (E) and a suitable lifting device onto Tooling (D). The weight of engine (24) is approximately 3527 kg (7775 lb). Install engine (24).
Illustration 2 g01291247
Install mounting bolts (25).
Illustration 3 g01291243
Illustration 4 g01291232
Install bolts (21). Use Tooling (B) in order to rotate the engine. Install bolts (22).
Illustration 5 g01291245
Remove Tooling (C).
Illustration 6 g01291228
Connect hose (20).
Illustration 7 g01291227
Install guard (19). Install bolts (18).
Illustration 8 g01291225
Install guard (17). Install bolts (16).
Illustration 9 g01291186
Connect clamp (15).
Illustration 10 g01291183
Attach Tooling (A) and a suitable lifting device onto exhaust elbow (14). The weight of exhaust elbow (14) is approximately 34 kg (75 lb). Install exhaust elbow (14).
Illustration 11 g01291179
Connect tube assembly (13). Install bolts (12). Repeat for the opposite side. Install bolts (11).
Illustration 12 g01291162
Connect clamp (10).
Illustration 13 g01291161
Connect hose assemblies (7), (8), and (9).
Illustration 14 g01291160
Connect harness assembly (6).
Illustration 15 g01291159
Connect harness assemblies (5). Connect cable assembly (4). Connect harness assemblies (3). Connect cable assembly (2). Connect hose assembly (1). End By:
Install the cooling package. Refer to Disassembly and Assembly, "Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Install".