O-RING 0992967 - Caterpillar

Illustration 1 g03348803
Table 1
Specification for 356-1246 Water Pump Gp
Item Qty Part Specification Description
1 1 112-1579 O-Ring Seal Lubricate the bore lightly with 5P-3975 Rubber Lubricant.
2 1 9X-7371 O-Ring Seal Apply Approved Retention Compounds to secure O-ring seal during assembly.
Illustration 2 g03348167
395-3467 Water Pump Gp
Table 2
Item Qty Part Specification Description
3 1 0S-1591 Bolt Torque to 39 3 N m (29 2 lb ft).
4 1 349-2654 Water Pump Seal With an installation tool, press the water pump seal onto the water pump shaft until the stationary cup is fully seated inside the pump housing.
5 1 153-1256 Lip Type Seal By using an installation tool, install the lip type seal with the primary lip toward water pump drive gear. Press the lip type seal with a press until the lip type seal is flush with the face inside the housing. Do not install the lip type seal by hand, do not lubricate the seal lip.
B 1 135-4928 Water Pump Shaft Diameter of the shaft at the carbon seal assembly seat area is 19.100 0.010 mm (0.7519 0.0004 inch).