O-RING 2U0762 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, and on all tubes. Plug all lines, all hoses, and all tubes. This will help to prevent fluid loss and this will help to keep contaminants from entering the system.
Illustration 1 g00650340
Block up auger drive (1) .
Remove three hydraulic hoses (2) .
Illustration 2 g00650342
Remove eight bolts (3), washers and nuts.
Illustration 3 g00653181
Slide the planetary (5) forward approximately 50.8 mm (2.0 inch).
Use a suitable lifting device to remove the planetary (5) and the gear motor from the drive housing (4). The planetary and gear motor weigh 86.2 kg (190 lb)
Illustration 4 g00653190
Remove both filler plugs (6) from the planetary.
Maintain the oil level to the bottom of the threads of the filler plugs when the holes are horizontal. Refer to Operation and Maintenance Manual, "Lubricant Viscosities" and refer to Operation and Maintenance Manual, "Refill Capacities".
Apply 5P-3413 Pipe Sealant to each of the filler plugs. Install the filler plugs.
Install the planetary and the gear motor into the drive housing.
Install the eight bolts, washers, and nuts.
Install the three hoses.