1P9340 OIL PUMP GROUP Caterpillar parts
583K, D8H, D8K
Rating:
Alternative (cross code) number:
CA1P9340
1P-9340
1P9340
CA1P9340
1P-9340
1P9340
Weight: 0.010 pounds 0 kg.
PIPELAYER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Information:
CONFIDENTIAL TIBU4366-00
TECHNICAL INFORMATION BULLETIN September 29, 2004
MARINE ENGINES 3508B (S2D S2E S2F)
3512B (S2J S2K S2L S2M S2N)
3516B (S2S S2T S2W S2X S2Y)
Component Code(s) 7620SUBJECT: 3500 A3 (Series 2) Marine Propulsion Software Does Not Perform The Injector Solenoid Test Properly
PROBLEM:
3500 ADEM III (Series 2) marine propulsion engines do not have capability to perform the injector solenoid test (clack test). When the test is initiated, cylinders 1, 2, and 3 perform their respective test properly. When cylinder 4 clacks, all of the rest of the cylinders clack as well. However, Electronic Technician (ET) reports that the test was run successfully. In the factory, cylinder 8 was unplugged and the test was run again. This resulted in the same ET successfully run solenoid test message.
Refer to Table 1 for a list of personality module part numbers containing this issue.
Personality Modules Containing Solenoid Test Issue
Round 2 A3 Primary Round 2 Secondary Round 3 A3 Primary Round 3 Secondary
247-6320 247-6321 250-1400 250-1401
247-6336 247-6337 N/A N/A
247-6338 247-6339 N/A N/A
247-6340 247-6341 250-1404 250-1405
247-6344 247-6345 N/A N/A
247-6346 247-6347 N/A N/A
247-6348 247-6349 N/A N/A
247-6350 247-6351 N/A N/A
247-6378 247-6379 250-1414 250-1415
247-6376 247-6377 N/A N/A
247-6342 247-6343 N/A N/A
247-6352 247-6353 N/A N/A
247-6354 247-6355 N/A N/A
247-6356 247-6357 250-1406 250-1407
247-6358 247-6359 N/A N/A
247-6360 247-6361 N/A N/A
247-6362 247-6363 N/A N/A
247-6364 247-6365 N/A N/A
247-6366 247-6367 N/A N/A
247-6370 247-6371 250-1410 250-1411
247-6372 247-6373 N/A N/A
247-6382 247-6383 N/A N/A
247-6322 247-6323 N/A N/A
247-6324 247-6325 250-1402 250-1403
247-6326 247-6327 N/A N/A
247-6328 247-6329 N/A N/A
247-6330 247-6331 N/A N/A
247-6332 247-6333 N/A N/A
247-6334 247-6335 254-0062 254-0063
247-6374 247-6375 250-1412 250-1413
247-6368 247-6369 250-1408 250-1409
247-6380 247-6381 N/A N/A
244-1708 244-1709 N/A N/A
Table 1
SOLUTION:
This is a flash file issue. Validation testing started September 1st. An Engine News article will be released when the new software has been made available.
COPYRIGHT 2004 CATERPILLAR
ALL RIGHTS RESERVED
TECHNICAL INFORMATION BULLETIN September 29, 2004
MARINE ENGINES 3508B (S2D S2E S2F)
3512B (S2J S2K S2L S2M S2N)
3516B (S2S S2T S2W S2X S2Y)
Component Code(s) 7620SUBJECT: 3500 A3 (Series 2) Marine Propulsion Software Does Not Perform The Injector Solenoid Test Properly
PROBLEM:
3500 ADEM III (Series 2) marine propulsion engines do not have capability to perform the injector solenoid test (clack test). When the test is initiated, cylinders 1, 2, and 3 perform their respective test properly. When cylinder 4 clacks, all of the rest of the cylinders clack as well. However, Electronic Technician (ET) reports that the test was run successfully. In the factory, cylinder 8 was unplugged and the test was run again. This resulted in the same ET successfully run solenoid test message.
Refer to Table 1 for a list of personality module part numbers containing this issue.
Personality Modules Containing Solenoid Test Issue
Round 2 A3 Primary Round 2 Secondary Round 3 A3 Primary Round 3 Secondary
247-6320 247-6321 250-1400 250-1401
247-6336 247-6337 N/A N/A
247-6338 247-6339 N/A N/A
247-6340 247-6341 250-1404 250-1405
247-6344 247-6345 N/A N/A
247-6346 247-6347 N/A N/A
247-6348 247-6349 N/A N/A
247-6350 247-6351 N/A N/A
247-6378 247-6379 250-1414 250-1415
247-6376 247-6377 N/A N/A
247-6342 247-6343 N/A N/A
247-6352 247-6353 N/A N/A
247-6354 247-6355 N/A N/A
247-6356 247-6357 250-1406 250-1407
247-6358 247-6359 N/A N/A
247-6360 247-6361 N/A N/A
247-6362 247-6363 N/A N/A
247-6364 247-6365 N/A N/A
247-6366 247-6367 N/A N/A
247-6370 247-6371 250-1410 250-1411
247-6372 247-6373 N/A N/A
247-6382 247-6383 N/A N/A
247-6322 247-6323 N/A N/A
247-6324 247-6325 250-1402 250-1403
247-6326 247-6327 N/A N/A
247-6328 247-6329 N/A N/A
247-6330 247-6331 N/A N/A
247-6332 247-6333 N/A N/A
247-6334 247-6335 254-0062 254-0063
247-6374 247-6375 250-1412 250-1413
247-6368 247-6369 250-1408 250-1409
247-6380 247-6381 N/A N/A
244-1708 244-1709 N/A N/A
Table 1
SOLUTION:
This is a flash file issue. Validation testing started September 1st. An Engine News article will be released when the new software has been made available.
COPYRIGHT 2004 CATERPILLAR
ALL RIGHTS RESERVED
Caterpillar SIS machinery equipment:
Caterpillar SIS
D8K TRACTOR / POWER SHIFT / 66V02085-UP (MACHINE) POWERED BY D342 ENGINE »
1P-9340
OIL PUMP GROUP
D8K TRACTOR / POWER SHIFT / 66V02085-UP (MACHINE) POWERED BY D342 ENGINE »
1P-9340
OIL PUMP GROUP
D8K TRACTOR-- IF EQUIPPED WITH ARRANGEMENT 1Z413 77V04429-UP (MACHINE) »
1P-9340
OIL PUMP GROUP
D8K TRACTOR / POWERSHIFT / 77V05006-UP (MACHINE) POWERED BY D342 ENGINE »
1P-9340
OIL PUMP GROUP
D8K TRACTOR / POWERSHIFT / 77V05006-UP (MACHINE) POWERED BY D342 ENGINE »
1P-9340
OIL PUMP GROUP
D8K TRACTOR / DIRECT DRIVE / 76V00505-UP (MACHINE) POWERED BY 342 ENGINE »
1P-9340
OIL PUMP GROUP
D8K TRACTOR / DIRECT DRIVE / 76V00505-UP (MACHINE) POWERED BY 342 ENGINE »
1P-9340
OIL PUMP GROUP
583 PIPELAYER / POWER SHIFT / 78V00535-UP (MACHINE) »
1P-9340
OIL PUMP GROUP (3H3093 N/S)
583 PIPELAYER / POWER SHIFT / 78V00535-UP (MACHINE) »
1P-9340
OIL PUMP GROUP (3H3093 N/S)
D8H TRACTOR / POWER SHIFT / 46A24433-UP (MACHINE) »
1P-9340
OIL PUMP GROUP
D8H TRACTOR / DIRECT DRIVE / 36A05329-UP (MACHINE) »
1P-9340
OIL PUMP ASSEMBLY
D342 VEHICULAR ENGINE 76V00001-00504 (MACHINE) »
1P-9340
OIL PUMP GROUP
Parts oil Caterpillar catalog:
5M6701
OIL PUMP GROUP
594, D8H, D9G
594, D8H, D9G
7M6621
OIL PUMP GROUP
D8H, D9G
D8H, D9G
7N4170
OIL PUMP GROUP
583K, D8K
583K, D8K
2P5104
OIL LINES
D8H
D8H
3H3093
OIL PUMP GROUP
583K, D8K
583K, D8K
7M4201
OIL PUMP ASSEMBLY
955H, 977H, D330A, D333A
955H, 977H, D330A, D333A
1W2230
OIL COOLER GROUP
225D, 3208, 613C
225D, 3208, 613C
2J5984
OIL FILTER GROUP
184, D9G
184, D9G
7S9622
OIL FILTER GROUP
594, D9G
594, D9G
4L4322
OIL PUMP
3192
3192
9L8362
OIL PAN GROUP
1140, 1145, 1150, 1160
1140, 1145, 1150, 1160
8W6774
OIL CHANGE GP-HIGH SPEED
631E, 631G, 633E II, 637E, 637G
631E, 631G, 633E II, 637E, 637G
6L1583
OIL FILTER GROUP
D346, D348, D379, D379A, D398, D398A, G379, G398
D346, D348, D379, D379A, D398, D398A, G379, G398